Epson PowerLite 1915 Panduan Pengaturan Cepat

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Perangkat lunak Epson PowerLite 1915. Epson PowerLite 1915 4 halaman. Air filter and vent maintenance
Juga untuk Epson PowerLite 1915: Panduan Pengoperasian (47 halaman), Panduan Pengguna (1 halaman), Brosur & Spesifikasi (4 halaman), Petunjuk Pembaruan (4 halaman), Pernyataan Kesesuaian (4 halaman), Daftar Bagian (1 halaman), Panduan Pengguna (25 halaman), Manual Pembaruan (8 halaman), Panduan Pengguna (25 halaman), Panduan Pemeliharaan (3 halaman)

Halaman Cetak

PowerLite

1915/1925W

Quick Setup

Before using the projector, make sure you read the safety instructions in the

User's Guide on your projector CD.

Connect the projector

Choose from the following connections:

Computer Monitor Port

Connect a computer using the VGA cable that came with the projector.

Connect one end to the projector's Computer1 or Computer2 port, and the

other end to your computer's

switch it to external display. You can also connect an audio cable.

Computer USB Port

Connect a computer (Windows

2000 or later only) using the USB cable that

came with the projector.

Connect the square end of the USB cable to the projector's

USB

TypeB (square) port. Connect the flat end of the cable to any USB

port on your computer.

Follow the on-screen instructions to install the Epson USB Display software.

(You need to install the software only the first time you connect.) Then press

the USB button on the remote control.

Network (LAN)

Connect the projector to a wired network using an Ethernet

See "Project Over a Wired Network" on the back of this sheet for more

information.

To connect to a wireless network, see "Project Wirelessly" on the back of the

sheet for instructions.

monitor port. If you are using a notebook,

cable.

Video Player

Connect up to 5 video devices and use the remote control to switch between

them.

* These cables are optional.

Camera or USB Device

Connect a digital camera or other USB device to the projector's USB1 Type A

(flat) port.

Thumb drive

Digital camera

Connect an Epson Document Camera to the USB2

DC-06 document camera

If you connect a digital camera or USB storage device, you can use the

projector's EasyMP Slide Converter feature. See the Network and PC Free

Operation Guide on your projector CD.

For information on connecting an external monitor or external speakers, see

the User's Guide on your projector CD.

port.