Epson PowerLite 400W Panduan Pengoperasian - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Perangkat lunak Epson PowerLite 400W. Epson PowerLite 400W 36 halaman. Warranty booklet
Juga untuk Epson PowerLite 400W: Panduan Pengguna (42 halaman), Katalog (10 halaman), Spesifikasi Produk (2 halaman), Panduan Pengoperasian (47 halaman), Panduan Tambahan (4 halaman), Panduan Pengaturan Cepat (6 halaman), Panduan Pengguna (1 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Manual Pembaruan (4 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Pernyataan Kesesuaian (4 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman)

Halaman Cetak
Epson PowerLite 400W Panduan Pengoperasian
Monitoring window layout
The icon patterns and their meanings are explained below.
Group
No warnings or problems
All projectors in the group are normal.
Warning or problem
A projector in the group has a warning or problem
status.
Notification
A projector requiring immediate attention has been
detected within the group.
Monitoring disabled
The projector is not being monitored. If you right-
click the icon and select "Monitoring enabled", the
projector will be added to the projectors that are
being monitored.
Data being updated
Projector
No warnings or problems*
Warning or problem
Notification
Monitoring disabled
Data being updated
Network error (monitor password authentication
error)
No Monitor Password was entered when the projector
was registered, or an incorrect Monitor Password was
entered. sp.9, 11,
Network error (TCP connection error)
Network error (ESC/VP.net communication
*3
error)
1
13
*2
*1 When "Temperature level display group view" is set to "On" at
"Environment setup" in the "Tool" menu, an icon indicating the internal
temperature of the projector will be displayed on top of the projector
icon. The default setting is "Off". As you can get an idea of how the
temperature inside the projector is increasing when the internal
temperature level is displayed, you can make improvements to the
projector's operating environment before a high internal temperature
alarm occurs or the temperature becomes abnormally hot.
*2 Check the following items.
• Check that the projector's power is turned on.
• Check that the LAN cable is connected.
• Check that "Network Monitoring" is set to "ON" or "Standby Mode"
is set to "Network ON" in the projector's configuration menu.
*3 Check that the projector has been correctly connected to the network.
TIP
The projector information that is generated when a problem is
detected is stored until EMP Monitor is closed. The EMP Monitor
displays will not be updated automatically even if the projector status
returns to normal. Click [Refresh] in the main window to update the
status.

Using the icons in "Grouping view"

f
The following icon operations can be carried out in "Grouping view".
•
Expanding and collapsing icons
Each time you double-click a group icon, the icons for the projector that
have been registered in that group are displayed or hidden.
•
Moving icons
To change the position of an icon within "Grouping view", simply drag
and drop the icon to be moved.
18
sp.23