Eckman EKELHT Buku Petunjuk - Halaman 10

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemangkas Eckman EKELHT. Eckman EKELHT 17 halaman. 10000rpm

Ⅶ. Assembly

1) Fitting the "D"handle to power unit

Remove the hand tighten knob from the "D"Handle.

The power unit handle has two sections. Do not attempt to mount the D handle on the part which is

sponge rubber padded. Only mount the D handle to the bare aluminium section.

Ensure the D handle is secured tightly and that there is no movement.

(see photos as below)

Handle tighten knob

Sponge rubber section

2) Fitting the hedge trimmer attachment (including 100cm extra extension pole) to the power

unit:

Remove the black sheath from end of the aluminium tube (see photo as below). Please note, check

the inside of the aluminium connectors and the inside/outside if the connecting poles for any dirt, grit

or aluminium swarf that may obstruct smooth connection .Brand new connectors and tubes may be a

little tight to begin with. Please wipe clean with a rag and then rub a little oil or vaseline inside the

connectors to ensure easy fitting and disconnection.

"D"handle

- 9 -