Epson PowerLite 83c Panduan Informasi Produk - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Informasi Produk untuk Perangkat lunak Epson PowerLite 83c. Epson PowerLite 83c 16 halaman. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Juga untuk Epson PowerLite 83c: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Panduan Pengoperasian (47 halaman), Panduan Pengaturan Cepat (7 halaman), Manual Fungsi (5 halaman), Buletin Dukungan Produk (5 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Daftar Bagian (1 halaman), Buletin Dukungan Produk (28 halaman), Pernyataan Kesesuaian (4 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman)

Halaman Cetak
Epson PowerLite 83c Panduan Informasi Produk
PowerLite 822p/83c Projector

Image Size and Projection Distance

The distance between the projector and the screen determines
the basic size of the projected image, as shown below. The
diagrams show approximately how big your image will be, based
on where you set up the projector. Because other adjustments—
such as those made with the zoom ring—also affect the size of
the image, the numbers shown in the illustration should be
considered as general guidelines, not exact measurements.
For more help determining the size of your image or where to
position the projector, try the Image Size Calculator on the
Drivers and Downloads page for your projector on Epson's
website.

Turning On the Projector

Make sure your projector and other equipment are set up and
connected correctly. Then turn on your projector, as described
below.
If you turn on your connected computer or video equipment
before starting the projector, the projector automatically detects
and displays the image source. If you turn on the projector first,
or have multiple pieces of equipment connected, you may have
to select the image source manually. See "Adjusting the Image
and Presentation" on page 6.
Follow these steps to plug in and turn on the projector:
1. Open the
slide (lens cover).
A/V Mute
4
PowerLite 822p/83c Projector
-
2. Connect one end of the power cord to the projector's power
inlet.
3. Connect the other end to an electrical outlet.
The P
light on top of the projector turns orange,
Power
indicating that the projector is receiving power but not yet
turned on.
4. Turn on your computer or video source if you have not
already.
5. Press the P
Power
control to turn it on.
The projector beeps and the P
the projector warms up. The projector lamp comes on in
about 5 seconds and the P
Warning:
Never look into the lens when the lamp is on. This can damage
your eyes, and is especially dangerous for children.
❏ If you're using a computer, you should see your
computer display projected after a moment or two. If not,
you need to select the image source, as described in the
next column.
(Windows only: If you see a message saying that it has
found a plug-and-play monitor, click
❏ If you're projecting a video, you may need to press the
Source Search
control to switch to your video source. Then press the
Play button on your DVD player or other device.
❏ If you are prompted to enter a password, enter it now.
3/08
button on the projector or the remote
Power button
light flashes green as
Power
light stays green.
Power
Cancel
button on the projector or remote
.)