Philips 107S63 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Philips 107S63. Philips 107S63 46 halaman. 17" real flat sxga crt monitor
Juga untuk Philips 107S63: Spesifikasi (2 halaman)

Halaman Cetak

OPERATING INSTRUCTIONS

General Instructions

The power switch is located at front panel of the monitor. Press the power

switch to turn the monitor on or off. The other control knobs are located at

the base of the monitor (See Figure 3). By changing these settings, the

picture can be adjusted to your personal preferences.

• The power cord should be connected.

• Connect the video cable from the monitor to the video card.

• To turn the monitor on, press the POWER switch to ON position. The

power indicator will light up.

• Your monitor features a unique quick switch system which provides a

picture within seconds after the monitor is switched on.

EXTERNAL CONTROLS

1. POWER

2. POWER INDICATOR

3. MENU

4. CONTRAST/

5. BRIGHTNESS/

6. EXIT

Notes

• Do not install the monitor in a location near heat sources such as radiators

or air ducts, or in a place subject to direct sunlight, or excessive dust or

mechanical vibration or shock.

• Save the original shipping carton and packing materials, as they will

come in handy if you ever have to ship your monitor.

• For maximum protection, repackage your monitor as it was originally

packed at the factory.

• To keep the monitor looking new, periodically clean it with a soft cloth.

Stubborn stains may be removed with a cloth lightly dampened with a

mild detergent solution. Never use strong solvents such as thinner,

benzene, or abrasive cleaners, since these will damage the monitor. As a

safety precaution, always unplug the monitor before cleaning it.

Figure 3

External Control Knob