Toshiba 13A25 Panduan Pemilik - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk TV Toshiba 13A25. Toshiba 13A25 15 halaman. 13" diagonal blackstripe ii color tv
Juga untuk Toshiba 13A25: Spesifikasi (2 halaman), Panduan Servis (10 halaman), Panduan Servis (43 halaman), Panduan Servis (10 halaman)

Halaman Cetak
Toshiba 13A25 Panduan Pemilik

TO MEMORIZE CHANNELS

This TV is equipped with a channel memory feature that allows the
TV to skip up or down to the next channel set into memory, skip-
ping over unwanted channels.
Before selecting channels, they must be programmed into the TV's
memory. In addition to normal VHF and UHF channels, this TV can
receive up to 113 Cable TV channels. To use this TV with an
antenna, set the TV/CABLE menu option to the TV setting. When
shipped from the factory, this menu option is in the CABLE setting.
TV/CABLE SELECTION
1
Press MENU.
2
Press SET + or – until the indicator next to
"CH SETUP" begins to flash, then press
ENTER.
3
Press SET + or – until the indicator next
to "TV/CABLE" begins to flash.
4
Press ENTER to select the TV or CABLE
mode. The arrow indicates the selected
mode.
5
Press MENU repeatedly until the menu
screen is cleared.
NOTE:
Contact your cable company to determine the type of cable
system used in your area.
AUTOMATIC CHANNEL MEMORY
1
Press MENU.
2
Press SET + or – until the indicator next to
"CH SETUP" begins to flash, then press
ENTER.
3
Press SET + or – until the indicator next
to "AUTO CH MEMORY" begins to flash,
then press ENTER. The TV will begin
memorizing all the channels available in
your area. Channel numbers will remain
red until auto memorizing is complete.
4
Press MENU repeatedly until the menu screen is
cleared.

ADJUSTING THE PICTURE

You can adjust the settings for brightness, contrast, color,
tint and sharpness.
1
Press MENU.
2
Press SET + or – until the indicator next to "PICTURE"
begins to flash, then press ENTER.
3
Press ENTER repeatedly to select the item you want to
adjust.
BRIGHTNESS
CONTRAST
J3M13121A(E)_P08-12
MENU
CH SETUP
PICTURE
LANGUAGE
V-CHIP SET
LOCK
ON TIMER
〈 + / — / ENTER / MENU 〉
TV
CABLE
AUTO CH MEMORY
ADD / DELETE
〈 + / — / ENTER / MENU 〉
MENU
CH SETUP
PICTURE
LANGUAGE
V-CHIP SET
LOCK
ON TIMER
〈 + / — / ENTER / MENU 〉
TV
CABLE
AUTO CH MEMORY
ADD / DELETE
〈 + / — / ENTER / MENU 〉
COLOR
TINT
SHARPNESS
9
TO ADD/DELETE CHANNELS
1
Press MENU.
2
Press SET + or – until the indicator next to
"CH SETUP" begins to flash, then press
ENTER.
3
Press SET + or – until the indicator
next to "ADD/DELETE" begins to flash,
then press ENTER.
4
Select the desired channels to be
added or deleted using the Direct
Channel Selection buttons (0–9), CH +
or –, SET + or –.
5
Press ENTER to select ADD or DELETE.
If an unmemorized channel was selected (step 4), the
channel indication will be red. Press ENTER if you wish
to ADD the unmemorized channel. The channel indica-
tor will change from red to green when a channel is
added and the channel will be memorized.
If a memorized channel was selected (step 4), the chan-
nel indication will be green. To delete the channel from
memory, press ENTER repeatedly until
"DEL" appears on-screen. The channel
indicator will change from green to red
when a channel is deleted. Repeat
steps 4 and 5 for each channel to be
added or deleted.
6
Press MENU repeatedly until the menu screen is
cleared.
4
Press SET + or – to adjust the setting.
+
BRIGHTNESS
higher
CONTRAST
lighter
COLOR
deeper
TINT
greenish
sharper
SHARPNESS
TO RETURN TO INITIAL SETTING:
Press RESET while the picture adjusting mode appears
on-screen.
01/12/2004, 12:35 PM
MENU
CH SETUP
PICTURE
LANGUAGE
V-CHIP SET
LOCK
ON TIMER
〈 + / — / ENTER / MENU 〉
TV
CABLE
AUTO CH MEMORY
ADD / DELETE
〈 + / — / ENTER / MENU 〉
ADD
CH 012
〈 0 – 9 / + / – / ENTER / MENU 〉
–
lower
darker
paler
reddish
softer
9