Toshiba 15VL64 series Panduan Pemilik - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk TV Toshiba 15VL64 series. Toshiba 15VL64 series 26 halaman.
Halaman Cetak
20VL64-en.book Page 18 Thursday, February 1, 2007 5:06 PM
Features: Picture Size, Sleep Timer,
Selecting the picture size
You can select a desired picture size (Auto, 4:3 or
16:9) either directly on the remote control or in
the on-screen display menu.
•
Using the remote control
Repeatedly press
on the remote control to
select a desired picture size.
•
Using the OSD menu
1. Press MENU, and then press
Special menu appears.
2. Press
to highlight Picture Size and press
/
to select a desired picture size.
Special
Language
Colour System
Picture Size
Sleep Timer
Panel Lock
Backlight
Teletext Setting >
MENU OK EXIT
Item
Pressing
Auto
Automatically adjusts the image to fit
the TV screen.
4:3
This is most suitable for 4:3 images like
computer monitors, standard definition
TV and 4:3 aspect DVD movies, as it
displays them without aspect alteration.
16:9
This is most suitable for images which
are already in a 16:9 aspect, like high
definition TV, as it displays them
without aspect alteration.
Turning off the TV automatically (Sleep
Timer)
If the Sleep Timer is set, the TV can automatically
switch to stand-by mode at the preset time.
To set the Sleep Timer:
1. Press MENU, and then press
Special menu appears.
Panel Lock, Backlight
2. Press
The timer starts at the time the timer is set, and the
TV indicator will turn from blue to yellow.
Picture
To cancel the sleep timer:
Size
Select 0 minutes for the timer.
Note: When an instant power failure occurs or
the TV is switched manually into standby, the
/
until the
sleep timer settings may be cleared.
Locking the control buttons on the TV's
side panel (Panel Lock)
You can lock the control buttons on the TV to
prevent your settings from being changed
accidentally (by children, for example). When
English
the Panel Lock is On, no control buttons on the TV
Auto
Auto
panel will operate except pressing
0 Minutes
into standby.
Off
Bright
To active the panel lock function:
1. Press MENU, and then press
2. Press
or
Note: Remove the remote control for Parental
control.
Setting the Backlight
Your LCD TV set has a light behind its LCD panel.
This light source, which is called a backlight,
affects the brightness of the entire screen. In a
darkened room with proper lighting, we
recommend you lower this setting before you
begin adjusting the brightness and contrast. You
can always raise it later if it proves too dim.
To set the Backlight:
•
Press Backlight repeatedly to select.
•
1. Press MENU, and then press
/
until the
2. Press
ENGLISH-18-
to highlight Sleep Timer and press
/
to set the length of time before the TV
turns off.
The time length ranges from 0 minutes to
120 minutes.
0
15
30
45
Special menu appears.
to highlight Panel Lock and press
/
to select On.
Using the remote control
Using the on-screen display
Special menu appears.
to highlight Backlight and press
/
to select Bright, Normal, or Power
Save.
60
120
to turn
/
until the
/
until the