Toshiba 19A24 Panduan Servis - Halaman 38
Jelajahi secara online atau unduh pdf Panduan Servis untuk TV Toshiba 19A24. Toshiba 19A24 40 halaman. Brochure
Juga untuk Toshiba 19A24: Panduan Pemilik (47 halaman), Spesifikasi (2 halaman)
Halaman Cetak
IC199 memory data
Addreess
0A
How to Change memory data
1.
Enter DATA SET mode by setting VOLUME to minimum.
2.
Press both VOL. DOWN button on the set and Channel button (6) on the remote control for more than 1 seconds.
3.
ADDRESS is now selected and should "blink". Using the VOL. +/- button on the remote, step through the
ADDRESS until required ADDRESS to be changed is reached.
4.
Press ENTER to select DATA. When DATA is selected, it will "blink".
5.
Again, step through the DATA using VOL. +/- button until required DATA value has been selected.
6.
Pressing ENTER will take you back to ADDRESS for further selection if necessary.
7.
Repeat steps 3 to 6 until all data has been checked.
8.
When satisfied correct DATA has been entered, turn POWER off (return to STANDBY MODE) to finish DATA input.
After the data input, set to the initializing of shipping.
9.
Turn POWER on.
10.
Press both VOL. DOWN button on the set and Channel button (1) on the remote control for more than 1 seconds.
11.
After the finishing of the initializing of shipping, the unit will turn off automatically.
The unit will now have the correct DATA for the new MEMORY IC.
NOTE FOR THE REPLACING OF MEMORY IC
From
To
00
0C
Change of MICON IC.
ADDRESS DATA
INIT
00
50
CRT ON 0010
Cause