Epson PowerLite 9300i - PowerLite 9300NL Multimedia Projector Panduan Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Perangkat lunak Epson PowerLite 9300i - PowerLite 9300NL Multimedia Projector. Epson PowerLite 9300i - PowerLite 9300NL Multimedia Projector 20 halaman. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Juga untuk Epson PowerLite 9300i - PowerLite 9300NL Multimedia Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Brosur & Spesifikasi (2 halaman), Panduan Pengoperasian (47 halaman), Buletin Dukungan Produk (27 halaman), Pengaturan Cepat (2 halaman), Suku Cadang Pengganti (1 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman)

Halaman Cetak
Epson PowerLite 9300i - PowerLite 9300NL Multimedia Projector Panduan Cepat

Connecting the Projector

You can connect the projector to four computer sources or
five video sources—up to a total of six sources altogether. You
can include an independent sound channel for each of the six
sources.

Type of connections

The following types of connections are possible, depending on
the kinds of signals your equipment generates and its available
output ports:
Computer equipment
Output signal
Required cable
VGA cable
Analog RGB video
BNC cable
VGA-to-BNC cable
DVI-D dual-link cable (DVI-to-DVI or
DVI
DFP-to-DVI available from EPSON)
Video equipment
Output signal
Required cable
Composite video
RCA video cable
S-video
S-video cable
Component video—
BNC cable
NTSC (YCbCr)
Component video—
BNC cable
HDTV (YPbPr)
VGA cable
RGB video
BNC cable
Note that the projector's Computer 1, Computer 2, and BNC
ports accept a variety of input signals. If you're connecting to
one of these ports, you'll need to make sure that the correct
input signal setting is selected, or your image won't display
properly.
To change the input signal setting, do the following:
1. After turning on the projector, press the
menu screen appears.
2. Select the
menu.
Setting
3. Change the
Computer 1 Input
setting, as needed, to match the signal generated by
Input
your computer or video equipment.
button. The
Menu
,
, or
Computer 2 Input
BNC
EPSON PowerLite 9300i Projector
Viewing Images on an External
Monitor
You can use an external monitor to display images from any
connected computer or video source. This lets you view your
presentation close-up, as well as on the projection screen.
Note: Some LCD monitors may not be able to display the image
correctly. If you have trouble displaying the image, connect a
multiscan monitor. If you're projecting computer images, make
sure the computer's refresh rate is set to 65 Hz or greater.
To use an external monitor, connect it to the projector's
port, as shown:
Monitor Out
External monitor
Follow these guidelines when using an external monitor:
The monitor displays the currently selected video source.
Press the
Preview
active sources at once (see page 7).
If you want, you can view (or preview) images on the
monitor while the projection screen is darkened after
pressing the
A/V Mute
You can also view images on the monitor while the
projector is in standby mode (plugged in but not turned
on), if the
Standby Mode
in the Advanced1 menu.
ON
10/03
button if you want to display all the
button.
setting has been set to
EPSON PowerLite 9300i Projector
Network
5
-