Toshiba 20A46C Panduan Pemilik - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk TV Toshiba 20A46C. Toshiba 20A46C 29 halaman. Toshiba 20a46c: user guide
Juga untuk Toshiba 20A46C: Panduan Servis (35 halaman)

Halaman Cetak

CLOSED CAPTION

WHAT IS CLOSED CAPTIONING?

This television has the capability to decode and display closed

captioned television programs. When available, closed captioning will

display captions on a small portion of the screen for hearing impaired

viewers or it will translate and display text in another language on half

of the screen.

TO VIEW CLOSED CAPTIONS

Press CAP/TEXT on the remote control to switch between normal TV

and the two closed ca-ption modes (Captions and half-screen Text).

Captions: This closed caption mode will display captions on the

screen in English or another language (depending on the setting of

Closed Captions 1/2). Generally, closed captions in English are

transmitted on captions channel 1 and closed captions in other

languages are transmitted on captions channel 2.

The captions will appear in places on the screen where they will least

interfere with the picture, usually on the bottom of the screen. News

programs will usually show three-line closed captions that scroll onto

the screen. Most other shows provide two- or three-line captions

placed near the character who is speaking so the viewer can follow the

dialogue. Words in italics or underlined describe titles, words in foreign

languages, or words requiring emphasis. Words that are sung usually

appear enclosed by musical notes.

• When activating the closed captioned decoder, there will be a short delay before the closed captioned text appears on the screen.

• Closed captioned text is only displayed in areas in which it is available.

• If no caption signal is received, no captions will appear, but the television will remain in the caption mode.

• Misspellings or unusual characters may occasionally appear during closed captioning. This is normal with closed captioning, especially with live

programs. This is because during live programs, captions are also entered live. These transmissions do not allow time for editing.

• When captions are being displayed, on-screen displays such as volume and mute may not be seen or may interfere with closed captions.

• Some cable systems and copy protection systems may interfere with the closed captioned signal.

• If using an indoor antenna or if TV reception is very poor, the closed caption decoder may not appear or may appear with strange characters or

misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.

SELECTING STEREO/SAP BROADCASTS

You can listen to high-fidelity stereo sound with the Multi-channel

TV Sound (MTS) feature. MTS can also transmit a second audio

program (SAP) containing a second language or other audio

information.

When the TV receives a stereo or SAP broadcast, the word

"STEREO" or "SAP" appears on-screen every time the TV is

turned on, the channel is changed, or RECALL is pressed.

The MTS feature is not available in VIDEO mode.

You can leave your TV in STEREO mode because it will

automatically output the type of sound being broadcast (stereo

or monaural). If the stereo sound is noisy, select MONO to

reduce the noise. The word "STEREO" or "SAP" appears in

light blue in the menu when the TV receives the signal.

TO SET THE ON TIMER

This feature allows you to program the TV to turn on automatically at a set time and channel.

NOTE: After a power failure or disconnection of the power, the timer setting will be lost.

Press MENU, then press SET + or – until

the indicator next to "ON TIMER" begins

to flash. Then press ENTER.

The ON TIMER menu appears.

Press SET + or – to set the desired hour (0–12), then

press ENTER.

Press SET + or – to set the desired minutes

(00, 05, 10, ...55), then press ENTER.

3M91721A[En] P08-12

ON TIMER

HOUR

00h

MINUTE

00m

CH 002

CANCEL

〈 + / — / ENTER / MENU 〉

Text: When available, the Text mode will fill half of the screen with a

programming schedule or other information.

After selecting a closed caption mode, it will stay in effect until you select

another mode, even if the channel is changed. If the captions signal is

lost due to a commercial or a break in the signal, the captions will

reappear when the signal is received again. When you change

channels, the display of captions will be delayed approximately 10

seconds. For television programs broadcasting with closed captions,

look in TV program listings for the closed captions symbol ("CC").

NOTICE OF POSSIBLE ADVERSE EFFECTS ON TV PICTURE DISPLAY

Avoid displaying stationary images on your TV screen for extended

periods of time. Fixed (non-moving) patterns or images (including

but not limited to PIP/POP windows, closed captions, video game

patterns, TV station logos, stock tickers, websites, and special

formats that do not use the entire screen) can become permanently

ingrained in the cathode ray tube(s) of the TV and cause subtle but

permanent ghost images. This type of damage is NOT COVERED

BY YOUR WARRANTY.

TO SELECT THE DESIRED MTS SETTING:

Repeatedly press MTS to select either STEREO, SAP, or

MONO. If the current program is not available

in stereo or SAP or is not broadcasting in stereo or SAP, those

settings will not be available when you press MTS.

STEREO

MONO

Press SET + or – to set the desired

channel, then press ENTER.

Press SET + or – to select the SET mode, then press ENTER.

Repeatedly press MENU until the menu screen closes.

NOTE:

To cancel the ON TIMER, select CANCEL in step 5 above.

Repeatedly press MENU until the menu screen closes.

22/12/05, 4:46 PM

SAP

ON TIMER

HOUR

08h

MINUTE

15m

CH 125

SET

〈 + / — / ENTER / MENU 〉