Toshiba 23L2300UC Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk TV Toshiba 23L2300UC. Toshiba 23L2300UC 2 halaman. Integrated high definition led television
Juga untuk Toshiba 23L2300UC: Panduan Sumber Daya (2 halaman)

Halaman Cetak

Receiving an HDTV Signal

There are three basic ways to receive an HDTV signal on your new TV:

1. Over-the-Air (Antenna)

2. Cable or Phone Company HDTV Service

Connect a high quality outside antenna (not

Cable or phone company HDTV service customers

supplied) directly to the antenna input on

will need to subscribe to High-Definition Service

the TV (reception cannot be guaranteed and

from your local provider. (Additional monthly

is based on proximity to the local signal).

subscription cost may apply.)

Connecting to a High-Definition Input on your TV

You can connect directly from an antenna, or if you are using an HD cable box or HD satellite box, there are three standard connections that can be used to receive an HD signal.

1. Antenna Input

2. HDMI

to HDMI

To connect directly from

HDMI

is the best connection

an antenna or basic cable:

for HDTV. This is a digital

connect the cable directly

connection that carries both

to the antenna input on the

digital video and digital audio.

back of the TV.

INPUT

OUTPUT

INPUT

Cable box/Satellite box

Initial Setup

You must select a Language, either Home/Store mode, and select ANT/CABLE before you can exit out of the Setup Menu. The EXIT button will not function

until these selections have been made.

1. Menu Language

2. Time Zone

Select a language.

Select a time zone

Press ENTER.

Initial Setup

Menu Language

English

Menu Language

English

Time Zone

Eastern

Time Zone

Eastern

5. Start Scan

Select Start Scan.

Press ENTER.

Channel Program

Press EXIT for no change.

Start Scan

If you want to stop scanning,

press EXIT while scanning.

3. Satellite

Satellite customers will need a High-Definition

satellite receiver and appropriate dish hardware.

(Additional monthly subscription cost may apply.)

3. DVI to HDMI

Your HD Cable Box or HD Satellite Receiver

may have a DVI connection. This will be

connected to the HDMI

jack on the TV using

an HDMI

cable and an HDMI

to DVI

converter. DVI carries digital video only.

Therefore, this will require a separate analog

audio connection as well (use the red and white

audio connections).

OUTPUT

INPUT

Cable box/Satellite box

3. Store / Home Mode

Select Store / Home Mode.

Press ENTER.

Store / Home Mode

To use this TV for display in a store showroom, please select [ Store ].

[ Home ] mode is recommended for normal use.

Home

Navigating the menu system

• When a menu is opened, use the arrow buttons (

Picture

on the remote control, to move in the corresponding

Picture Mode

Standard

direction in the menu.

Sound

Reset

Backlight

100

• Press ENTER to save your menu settings or select a

Options

Contrast

100

Brightness

highlighted item. (A highlighted menu item appears in a

Installation

Color

different color in the menu.)

Tint

Timers

Sharpness

• All menus close automatically if you do not make a

Advanced Picture Setting

selection within 60 seconds.

Get Help

Display Setting

• To close a menu instantly, press EXIT.

You can use the buttons on the remote control

to access and navigate your TV's onscreen

menu system.

• Press MENU to open the menu system.

Quick Tour

Back

4. Component Video Input

ColorStream

HD Component may also be used to

receive HDTV. Use if no HDMI

or DVI jack is

available. There are three jacks color-coded with

red-green-blue on the back of the TV and HD

cable box or HD Satellite receiver. This connection

will require a separate analog audio connection

(use the red and white audio connections).

OUTPUT

INPUT

Cable box/Satellite box

Left side

4. ANT/CABLE in

Select Antenna or Cable.

Press ENTER.

ANT / CABLE in

Antenna

Need Help?

)

Consult the electronic User's Guide

To access the electronic User's Guide please visit

support.toshiba.com. Click on Product Support, search for

your model, and then click User's Guide or Manuals & Specs.

For solutions to the most common problems, refer to the

Troubleshooting section of the User's Guide.

Visit Toshiba's Support Web site

support.toshiba.ca/web/support.grp

Back

32/39/50 L 2300 UC S eries

23 L 2300 UC S eries

Left side

32/39/50 L 2300 UC S eries

Power button

Channel / Volume increase/decrease

Switches the function of the

VOL +/- buttons to select the

CH/INPUT

volume, channel, or input mode.

For more information about the CH/INPUT button,

refer to the User's Guide.

HDMI

port

USB port

Most problems are easy to correct. Save time with one of these simple

solutions.

Call Toshiba Customer Support Center

If you are experiencing a technical problem or have questions

regarding operation, authorized service centers, warranty or

parts, Toshiba Customer Support Center is ready to help

1-800-268-3404 From within Canada

Colorstream is a registered trademark of Toshiba America Information Systems, Inc. and/or Toshiba Corporation.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing, LLC.

All other brand and product names are trademarks or registered trademarks of their respective companies.

Printed on recycled paper

Toshiba of Canada Limited.

23 L 2300 UC S eries

HDMI

port

USB port

• HF6RI23011I • 12/12