Epson PowerLite 98 Panduan Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Perangkat lunak Epson PowerLite 98. Epson PowerLite 98 47 halaman. Warranty statement
Juga untuk Epson PowerLite 98: Panduan Pengoperasian (48 halaman), Pengaturan Cepat (4 halaman), Pernyataan Kesesuaian (4 halaman), Buku Panduan Instalasi (2 halaman)

Installing EasyMP Network Updater

Download and install EasyMP Network Updater on your computer.

Note: You need administrator authority to install EasyMP Network Updater.

1. Download the latest version of EasyMP Network Updater from the

2. Double-click Setup.exe to start the installer.

3. Follow the on-screen instructions.

Parent topic:

If the projector you want to update is not connected to your network, select the necessary settings to

connect it to your network. Connect the projector using a wired network system. Firmware cannot be

updated over a wireless LAN.

Parent topic:

Setting Up a Projector to Connect in Advanced Connection Mode (Wired)

To connect a projector to a wired LAN, you need to select network settings on the computer and the

projector.

1. Check that DHCP is available under the current network environment.

Note: If DHCP is not available, write down the following values that are available for your projector.

• IP Address

• Subnet Mask

• Gateway Address

2. Connect the computer to the network.

Note: To set up a network connection, see the documentation supplied with your computer or

network adapter.

3. Connect a LAN cable to the projector.

Installing the Application

Setting Up EasyMP Network Updater for the First Time

Epson

website.