Epson RB-V11H303020-N - PowerLite 83+ LCD Projector Panduan Pengoperasian - Halaman 34

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Perangkat lunak Epson RB-V11H303020-N - PowerLite 83+ LCD Projector. Epson RB-V11H303020-N - PowerLite 83+ LCD Projector 36 halaman. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Juga untuk Epson RB-V11H303020-N - PowerLite 83+ LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengaturan Cepat (7 halaman), Panduan Pengoperasian (47 halaman), Pernyataan Kesesuaian (4 halaman), Brosur (2 halaman), Panduan Pengguna (1 halaman), Daftar Bagian (1 halaman), Buletin Dukungan Produk (41 halaman)

Halaman Cetak
Epson RB-V11H303020-N - PowerLite 83+ LCD Projector Panduan Pengoperasian

Application lock function

You can use the application lock to prevent third parties from operating the
projectors using EMP Monitor and from changing settings without authority.
Opening and closing EMP Monitor and status monitoring can still be carried
out even when the application lock is applied.
In addition, when a password has been set, the password must be entered in
order to cancel the application lock. This ensures that the application lock can
not be easily cancelled, and thus improves system security.
Switching application lock between enabled and
disabled

Enabling the lock

f
PROCEDURE
Select "Application lock" from the "Tool" menu.
The application lock will be enabled and no operations will be
possible other than opening and closing EMP Monitor and disabling
the application lock.

Disabling the lock

f
PROCEDURE
1
Select "Application unlock" from the "Tool" menu.
The password entry window will be displayed, so
2
enter the set password and then click [OK].
If no password has been set (default setting), click [OK]
without entering a password. It is recommended that you enter a
password in order to strengthen security.
The application lock will be cancelled and operations can be
carried out as normal.

Setting a password for cancelling application lock

Carry out the following operations while application lock is cancelled.
PROCEDURE
1
Select "Environment setup" from the "Tool" menu.
The "Environment setup" window will be displayed.
Select "Change the application lock password".
2
Enter the password in both the "New password" and
3
"New password (confirm)" boxes and then click [OK].
The password can be up to 16 bytes in length. Single-byte
alphanumeric characters can be used.
33