Epson Stylus COLOR 3000 Panduan Pengguna - Halaman 25

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Epson Stylus COLOR 3000. Epson Stylus COLOR 3000 43 halaman. Epson stylus color 3000: product information
Juga untuk Epson Stylus COLOR 3000: Panduan Pengguna (34 halaman), Panduan Pengguna (38 halaman), Brosur & Spesifikasi (24 halaman), Panduan Pengaturan Cepat (21 halaman), Brosur & Spesifikasi (2 halaman), Spesifikasi (1 halaman), Manual (13 halaman), Brosur & Spesifikasi (4 halaman)

Printing with the StylusRIP Software

3. Open the StylusRIP folder on the hard disk and

double-click the

run the server software, you see a dialog box asking you to

select your port or your printer name.

4. Select the printer or modem port if you connected the

printer by serial cable.

If you connected the printer by a network interface card

and use AppleTalk zones, select the printer's zone and then

select the printer name. Or use the

locate the printer on your network.

Note:

If you change your printer connection later, you must

reconfigure StylusRIP for your new port. First, quit StylusRIP,

turn off your printer, and disconnect it from the previously

selected port or interface. Then connect the printer to the new

port or interface. Open the StylusRIP folder on your hard disk

and drag the CPSPref file into the trash. Then perform steps 1

through 3 in this section. When you see the Connection dialog

box, select your printer on the new port or interface.

5. Click

updated printer and then prepares it for printing.

6. If you're using StylusRIP on a standalone Macintosh, quit

the StylusRIP Server; you're ready to start printing.

If you're using StylusRIP on a network, open the File menu

and select

StylusRIP Server

. The StylusRIP Server software searches for the

Preferences

2-2

icon. The first time you

Net Scan

button to