Epson Stylus Color 900 Panduan Pengguna - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Epson Stylus Color 900. Epson Stylus Color 900 40 halaman. For windows and macintosh
Juga untuk Epson Stylus Color 900: Spesifikasi (2 halaman), Mulai dari Sini Manual (12 halaman), Buletin Dukungan Produk (6 halaman), Buletin Dukungan Produk (1 halaman), Panduan Informasi Produk (13 halaman), Lembar Informasi Produk (4 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (2 halaman), Buletin Dukungan Produk (4 halaman), Buletin Dukungan Produk (7 halaman), Panduan Online (12 halaman)

Hold down the

The printer starts cleaning the print head and the P power light

begins flashing. Print head cleaning takes about one minutes to

complete.

Caution:

Never turn off the printer while the P power light is flashing.

Doing so may damage the printer.

When the P power light stops flashing, print a few lines from a

document to confirm that the head is clean and reset the cleaning

cycle.

If print quality hasn't improved after repeating this procedure

four or five times, turn the printer off and leave it alone overnight.

Then do the head cleaning again.

If the print quality still has not improved, one or both of your ink

cartridges may be old or damaged and may need to be replaced.

To replace an ink cartridge before it is empty, see "Ink cartridge

problems" on page 20.

If print quality remains a problem after replacing the ink

cartridges, contact your dealer.

Note:

To maintain print quality, we recommend turning on the printer for at

least one minute every month.

cleaning button for three seconds.