Toshiba DIGITAL Series Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Semua dalam Satu Printer Toshiba DIGITAL Series. Toshiba DIGITAL Series 48 halaman. Split type
Juga untuk Toshiba DIGITAL Series: Panduan Pemilik (48 halaman), Panduan Pengguna (45 halaman), Panduan Pengguna (49 halaman), Panduan Pemilik (50 halaman), Panduan Pemilik (4 halaman), Panduan Pemilik (41 halaman), Panduan Pemilik (22 halaman), Catatan Instalasi (4 halaman)

Connecting External Equipment

Before connecting any external equipment, remove the mains plug from the wall socket.

Aerial cable:...........................................................

Connect the aerial to the ANT. socket on the rear of the

television.

SCART lead:..........................................................

If you use a decoder* or a media recorder, it is essential that

the scart cable is connected to the television.

Before running ﬁ rst time installation, any connected devices

need to be set to standby mode.

The SPDIF Coax. OUT socket enables the connection of a

suitable surround sound system.

HDMI® (High-Deﬁ nition Multimedia Interface) is for using

with a DVD decoder or other equipment with digital audio and

video output. It is designed for best performance with 1080i

and 1080p high-deﬁ nition video signals but will also accept

and display VGA, 480i, 480p, 576i, 576p and 720p signals.

PC format signals will also be displayed.

NOTE: Although this television is able to connect to HDMI

40BV701B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10073323.indd 14

equipment, it is possible that some equipment may not

operate correctly.

You can use Subwoofer Out for connecting an external, active

subwoofer to the set to give a much deeper bass effect.

A wide variety of external equipment can be connected to the

television; therefore, the relevant owner's manuals for all addi-

tional equipment must be referred to for exact instructions.

If the television automatically switches over to monitor

external equipment, return to normal television by pressing

the desired programme position button. To recall external

equipment, press SOURCE button repeatedly to switch

between sources.

- 14 -

03.10.2011 19:01:56