Toshiba e-BRIDGE Re-Rite Setup Manual - Halaman 39

Jelajahi secara online atau unduh pdf Setup Manual untuk Semua dalam Satu Printer Toshiba e-BRIDGE Re-Rite. Toshiba e-BRIDGE Re-Rite 42 halaman.

Security Notice



You should not use this method of installation where your documents require

higher levels of security, in such cases please use a secure network InPath.

Pre-requisites



e-BRIDGE Re-Rite Installed and Registered



Toshiba MFP installed on your network



Access to the Toshiba MFP Template Backup File

(provided by your Authorised Toshiba Support Personnel)



Access to Toshiba MFP Network Administrators Guide for reference

Upload the Toshiba MFP Template Backup File to your MFP using the TopAccess

WEB Administration Utility (you must have Administration rights)

It is important to note that uploading backup template files to you MFP will

overwrite any existing templates.

Configure the e-BRIDGE Re-Rite InPath (page 18) so that you add your Toshiba

MFP's shared drive path e.g.

where you have configured the MFP with a static IP address you can use the

following e.g.

\\192.168.0.21\FILE_SHARE

Configure the e-BRIDGE Re-Rite DiskOut (page 27) path for the InPath set in the

previous step.

Do a test scan using your templates on the MFP and access the path set in

DiskOut for the processed file format/s.

\\Toshiba-eS2500c\FILE_SHARE

MFP Basic Configuration