Toshiba e-STUDIO 230L Panduan Servis - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Servis untuk Semua dalam Satu Printer Toshiba e-STUDIO 230L. Toshiba e-STUDIO 230L 20 halaman.

Eliminated portion.................... Leading edges: 3.0±2.0 mm, Side/trailing edges: 2.0±2.0 mm (copy)

Paper feeding .......................... Standard drawers:

Capacity of originals in the reversing automatic document feeder (Option)

.................................................. A3 to A5-R, LD to ST-R:

Automatic duplexing unit (ADU is available as standard equipment for some destinations or versions.)

.................................................. Stackless, Switchback type

Toner supply ............................ Automatic toner density detection/supply

Density control......................... Automatic density mode and manual density mode selectable in 11

Weight ..................................... Approximately 75 kg (165.34 lb.): e-STUDIO200L/230/230L/280/280S

Power requirements ................ AC 110 V / 13.2 A, 115 V or 127 V / 12 A

* The acceptable value of each voltage is ±10%.

Power consumption................. 1.5 kW or less (115 V series, 200 V series)

* The electric power is supplied to the RADF, (ADU), Finisher, Job Separator, Offset Tray, PFP and

LCF through the equipment.

Total counter............................ Electronical counter

e-STUDIO200L/202L/230/232/280/282 SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES

Leading / trailing edges: 5.0±2.0 mm, Side edges: 5.0±2.0 mm (print)

1 or 2 drawers (stack height 60.5 mm, equivalent to 550 sheets;

64 to 80 g/m

(17 to 22 lb. Bond)): Depends on destinations or

versions.

PFP:

Option (One drawer or two: stack height 60.5 mm, equivalent to

550 sheets; 64 to 80 g/m

LCF:

Option (Stack height 137.5 mm x 2: equivalent to 2500 sheets;

64 to 80 g/m

(17 to 22 lb. Bond))

Bypass feeding:

Stack height 11 mm: equivalent to 100 sheets; 64 to 80 g/m

to 22 lb. Bond)

100 sheets / 80 g/m

Toner cartridge replacing method (There is a recovered toner supply

mechanism.)

steps

Approximately 77 kg (169.75 lb.): e-STUDIO202/232/232S/282/282S

(include the developer material and drum) (The ADU and Drawer mod-

ule are installed.)

220-240 V or 240 V / 8 A (50/60 Hz)

1 - 4

05/11

(17 to 22 lb. Bond))

(Stack height 16 mm or less)

(17