Toshiba e-STUDIO 307 Manual Informasi Keselamatan - Halaman 23

Jelajahi secara online atau unduh pdf Manual Informasi Keselamatan untuk Semua dalam Satu Printer Toshiba e-STUDIO 307. Toshiba e-STUDIO 307 32 halaman. Multifunctional digital color systems

Toshiba e-STUDIO 307 Manual Informasi Keselamatan
1.GENERAL PRECAUTIONS
 When using the Multifunctional Digital Systems
 Do not take off the cover of the equipment; otherwise you could be injured or get an electric shock.
 Do not remove or connect the plug with wet hands, as this could give you an electric shock.
 Do not place any container with liquid (flower vases, coffee cups, etc.) on or near the equipment.
This could cause a fire or give you an electric shock.
 Keep paper clips and staples away from the air vent. If not, a fire could result or you could get an electric
shock.
 If the Multifunctional Digital Systems becomes excessively hot, smoke comes out of it or there is an odd
smell or noise, proceed as follows.
Turn the main power switch OFF and remove the plug from the outlet, then contact your service
representative.
 If the Multifunctional Digital Systems will not be used for more than one month, remove the plug from the
outlet for safety purposes during that time. If an insulation failure occurs, this could cause a fire or give
you an electric shock.
 Do not place heavy objects (4 kg/9 lb. or more) on the original glass and do not press on it with force.
Breaking the glass could cause personal injury.
 Do not place heavy objects (4 kg/9 lb. or more) on the Multifunctional Digital Systems. If the objects fall
off, this could cause injury.
 Do not touch the fuser unit or the metal area around it. Since they are very hot, you could be burned or
the shock could cause you to injure your hand in the machine.
 Be careful not to let your fingers be caught when closing the drawer. This could cause an injury.
 Be careful not to let your fingers be caught between the equipment and the duplexing unit or automatic
duplexing unit. This could cause an injury.
 Do not touch the metal portion of the guide plate in the duplexing unit or automatic duplexing unit as it
could burn you.
 Do not touch the hinge (= a connecting part) on the rear side of the Reversing Automatic Document
Feeder. This could catch and injure your fingers when you open or close the Reversing Automatic
Document Feeder.
 Always keep hands and fingers clear of the finisher tray hinge, as the tray could move unexpectedly.
Failure to do so could result in injury to your hand and/or fingers.
 Do not use the pulled out drawers as steps. This could injure you if you fall.
e-STUDIO2050C/2550C, e-STUDIO2051C/2551C, e-STUDIO2555C/3055C/3555C/4555C/
5055C and e-STUDIO2555CSE/3055CSE/3555CSE/4555CSE/5055CSE
 When changing the angle of the control panel, be careful not to catch your hands in the gap between the
equipment and the control panel. This could cause personal injury.
 Do not place objects of weighing 3.3 kg/7.3 lb. or more on the optional work table. Breaking the work
table could cause personal injury.
e-STUDIO5560C/6560C/6570C
 Be careful not to catch your fingers between the duplexing unit and its cover. This could cause an injury.
 Do not touch the metal portion of the bridge unit as it could burn you.
General Precautions
21