Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Lembar Spesifikasi - Halaman 2

Jelajahi secara online atau unduh pdf Lembar Spesifikasi untuk Perangkat lunak Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst. Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst 6 halaman. Warranty statement
Juga untuk Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst: Memulai (13 halaman), Brosur & Spesifikasi (6 halaman), Setup Manual (16 halaman), Panduan Referensi Cepat (12 halaman), Manual Jaringan (46 halaman), Panduan Instalasi (4 halaman), Panduan Informasi Produk (16 halaman), Garansi Terbatas (12 halaman)

Halaman Cetak
Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Lembar Spesifikasi
Set Up and Turn On the Printer
1
Connect the power cord to the
AC inlet on the back of the
printer. (Do not connect the
printer cable yet.)
2
Plug the other end of the power
cord into a properly grounded
electrical outlet.
3
Insert the paper tray into the slots at the
front of the printer.

Install Ink Cartridges

1
Press the
power button to turn on the printer.
2
Press both ink compartment covers to open them.
3
Raise both ink levers.
4
Remove each ink cartridge from its package and gently shake
the cartridge.
The first time you install ink cartridges, the printer uses
Note:
some ink to charge the printing system, so print yields may be
lower with the first cartridges. Subsequent ink cartridges will last
for their full rated life.
5
Install the ink cartridges in the printer. Hold each
cartridge with the arrow pointing toward the printer,
then insert it into its slot. Make sure you insert each
cartridge in the correct slot.
AC inlet
Power button