Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Panduan Referensi Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Perangkat lunak Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst. Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst 12 halaman. Warranty statement
Juga untuk Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst: Lembar Spesifikasi (6 halaman), Memulai (13 halaman), Brosur & Spesifikasi (6 halaman), Setup Manual (16 halaman), Manual Jaringan (46 halaman), Panduan Instalasi (4 halaman), Panduan Informasi Produk (16 halaman), Garansi Terbatas (12 halaman)

Halaman Cetak

Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Panduan Referensi Cepat

Loading Roll Paper

Slide the black paper stop off the end of

the spindle.

Note:

To use paper with a 2-inch core, remove the

gray adapters from the paper stops at each end.

See your Printer Guide for details.

Position the roll as shown, then slide it onto

the spindle.

Slide the black paper stop back onto the spindle and

insert it firmly into the end of the roll.

Open the roll paper cover.

Place the roll paper in the printer as shown. (The

black end of the spindle goes on the left.)

Make sure the printer is turned on, then press

the paper source button until the or

icon appears.

Raise the roll paper support on top of the paper

tray cover.

Release the paper lever.

Hold both sides of the paper and feed it into

the slot.

Feed the paper all the way through the printer until

it is aligned with the OTHERS mark on the paper

tray cover. Align the right edge of the paper with

the vertical mark on the right side of the tray cover.

Then return the paper lever to the secured position

and close the roll paper cover.

The printer automatically feeds the paper to the

printing position.

Caution:

To prevent creasing the paper, remove it

from the paper path and roll it up when you're not

printing.

OTHERS