Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Manual Jaringan - Halaman 11

Jelajahi secara online atau unduh pdf Manual Jaringan untuk Perangkat lunak Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst. Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst 46 halaman. Warranty statement
Juga untuk Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst: Lembar Spesifikasi (6 halaman), Memulai (13 halaman), Brosur & Spesifikasi (6 halaman), Setup Manual (16 halaman), Panduan Referensi Cepat (12 halaman), Panduan Instalasi (4 halaman), Panduan Informasi Produk (16 halaman), Garansi Terbatas (12 halaman)

Halaman Cetak
Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Manual Jaringan

Installing Network Components on Your Computer

Before configuring the network interface and printing from the computer, you need to
install the necessary components (such as TCP/IP) and assign an IP address and subnet
mask for your computer, depending on the printing method you want to use. See the
section in this chapter appropriate for your operating system.

Windows Vista

For Windows Vista, use the following procedure to install the necessary components.
1. Click Start, click Control Panel, and then click View network status and tasks or
double-click Network and Sharing Center.
2. Click View Status, and then click the Properties button.
Note:
If the User Account Control screen appears, click the Continue button.
3. Check if the following necessary components are in the list.
The following table lists the components required for configuring the network
interface with EpsonNet Config.
EpsonNet Config's setting screens
TCP/IP, IPP, SNMP (IP trap)
MS Network
Necessary components
Internet Protocol (TCP/IP)
Internet Protocol (TCP/IP)
Setting Up Your System for Network Printing
11