Toshiba E-Studio 5506AC Panduan Persiapan Kertas - Halaman 38

Jelajahi secara online atau unduh pdf Panduan Persiapan Kertas untuk Semua dalam Satu Printer Toshiba E-Studio 5506AC. Toshiba E-Studio 5506AC 46 halaman.

Halaman Cetak

2.PLACING ORIGINALS

Continuous feed mode (copy)

The feeding mode is set at "continuous feed mode" by default. Once you set the originals and then press the [START]

button, they are scanned page by page continuously. It is useful when you want to scan more than one original at one

time.

For how to set the feeding mode, refer to the Copying Guide. The way of placing originals is the same as Scan/Fax.

 P.37 "Scanning originals with the ADF at copying"

Single feed mode(copy)

When the feeding mode is set at "single feed mode", an original is fed automatically as it is placed on the ADF. It is

useful when you want to scan only 1 original sheet.

For how to set the feeding mode, refer to the Copying Guide. Follow the procedures below to place paper.

Align the side guides to the original length.

Insert the original with its face up and straight along the side guides.

The original is automatically pulled in and then the menu of step 3 will be displayed on the touch panel.

Be sure to let go of the original when it starts being pulled.

If there is another original, insert it in the same way.

After all the originals are pulled in, press [Job Finish].

If you want to stop copying, press [Job Cancel].

38 Placing Originals