Epson Stylus Pro 7600 Photographic Dye Ink Panduan Referensi Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Perangkat lunak Epson Stylus Pro 7600 Photographic Dye Ink. Epson Stylus Pro 7600 Photographic Dye Ink 11 halaman. Epson stylus pro 7600: brochure
Juga untuk Epson Stylus Pro 7600 Photographic Dye Ink: Brosur & Spesifikasi (24 halaman), Manual Pembongkaran dan Pengaturan (24 halaman), Manual Informasi (16 halaman), Spesifikasi (4 halaman), Panduan Instalasi Cepat (34 halaman), Informasi Produk (15 halaman), Garansi (8 halaman), Brosur & Spesifikasi (8 halaman), Brosur & Spesifikasi (16 halaman), Panduan Referensi Produk (28 halaman), Pembaruan Manual (4 halaman)

Halaman Cetak
Epson Stylus Pro 7600 Photographic Dye Ink Panduan Referensi Cepat
1
Make sure the printer is on and the roll paper
cover is closed.
2
Press the Paper Source button until the Sheet
light comes on.
3
Push the paper lever back to the released
position.
4
Feed the sheet into the paper slot. Make sure the
right edge of the paper is straight and aligned
with the scale on the roll paper cover.
For a large sheet of paper, feed it so that it comes
out below. Then align the edges of the sheet with
the rows of holes as shown.
5
6
7
8

Printing on Posterboard

When you print on posterboard or other thick media
(more than 19 mil thick), you should open the front cover
before loading as described below.
1
INCH
MM
2
3
2
For heavy paper, you may need to increase
the suction strength by pressing the
This helps hold the paper in place during
loading and printing.
For lightweight paper, decrease the suction by
pressing the
button.
Return the paper lever to the locked position.
Press the Pause button. The sheet feeds into
the printing position automatically and READY
appears on the control panel.
To avoid damaging the printer, never move
the paper lever during printing, or while the
Operate or Pause light is flashing.
Print your page. After it is finished, the sheet
stays in the printer.
To remove your print, press the Paper Feed
button.
Make sure the printer is on and the roll paper
cover is closed.
Press the Paper Source button until the Sheet
light comes on.
Push the paper lever back to the released position.
button.
Continue