Philips P Line 65BDL3017P Panduan Pengguna - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Philips P Line 65BDL3017P. Philips P Line 65BDL3017P 41 halaman.

Halaman Cetak

WOL

Choose to turn on or off the wake on LAN function.

Choose from : {Off} / { On}

Light sensor (require Philips accessory CRD41 External

Sensor Box)

Choose to turn on or off backlight adjustment according to

environment brightness.

Choose from : {Off} / { On}

Human sensor (require Philips accessory CRD41 External

Sensor Box)

This function will turn the backlight On when it senses the

presence of human and turn it off after a specified period of

time.

The options are:

•

{Off} (Default), {10 Min.}, {20 Min.}, {30 Min.}, {40 Min.},

{50 Min.}, {60 Min.}

Power LED Light

Select {Off} to turn off the indicator.

Network settings

•

DHCP Enable -> Cannot modify IP address/Subnet

mask/Default gateway

•

DHCP Disable-> Can manually input IP address/Subnet

mask/Default gateway.

Configuration1 reset

Reset all settings in Configuration1 menu to the factory

preset values.

Factory reset

Reset all settings in the OSD menus of {Picture}, {Screen},

{Audio}, {PIP}, {Configuration1}, {Configuration2}, and

{Advanced option} to the factory preset values.

Press [ ] or [ ] button to select {Reset}, and press [OK]

button to do the reset.

5.2.5. Configuration2 menu

OSD turn o

Picture

OSD transparency

Information OSD

Screen

Logo

Monitor ID

Audio

Heat Status

Monitor Info

Con guration 1

HDMI EDID

OSD Rotation

Con guration 2

Language

Con guration2 Reset

Option

OSD turn off

Set the period of time the OSD (on-screen display) menu

stays on the screen.

The options are: {5 ~ 100} seconds.

OSD Transparency

Adjust OSD transparency.

•

{0} - Transparency off.

•

Information OSD

Set the period of time the information OSD is displayed on

the upper right corner of the screen. The information OSD

will display when input signal is changed.

The information OSD will remain on the screen with {Off}

selection.

The options are: {1 - 60} seconds.

Logo

Choose to enable or disable the picture of Logo when

turning on your display.

The options are: {Off} /{On}

Monitor ID

Set the ID number for controlling the display via the RS232

connection.

Each display must have a unique ID number when multiple

sets of display are connected. Monitor ID number range is

between 1 to 255.

•

4 Sec

1 . 4

Landscape

English

Heat status

This function allows you to check the thermal status at any

time.

{1-100} - Transparency level 1-100

{1-255} – {Monitor ID} The default setting is 1.

{1-254} – {Monitor group} The default setting is 1.

{1-15} – {Tiling matrix} The default setting is 1.

{Auto ID} The {Auto ID} setup function enables setting up

{Monitor ID} of connected machine according to {Tiling

matrix} settings. Example: Tiling matrix sets as 4

{Tiling matrix}: Tiling matrix number range is between 1 to

15. The default setting is 1.

Monitor Id

Monitor group

{Auto ID}: The option are: {Start} / {End}. The default is

{End}.

Switch to Start option to set up IDs of machines

backward from current one.

Once the setup is completed, the option exits to End

automatically.

To use this function, serially connect all machines with

RS-232 cable and set their Control ports to RS-232 too.

65BDL3017P