Philips Signage Solutions BDL6520EL Panduan Pengguna - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Philips Signage Solutions BDL6520EL. Philips Signage Solutions BDL6520EL 37 halaman. Philips dislplay lcd
Juga untuk Philips Signage Solutions BDL6520EL: Panduan Cepat (3 halaman)
Halaman Cetak
BDL6520EL
2.
Parts and Functions
2.1.
Control Panel
[
POWER] button
1
Press to turn the display on or put the display to standby.
[
MUTE] button
2
Press to switch the audio mute ON/OFF.
[
INPUT] button
3
Press to select the input source.
[ ] button
4
Press to increase the adjustment while OSD menu is on, or increase
the audio output level while OSD menu is off.
•
Used as [SET] button in the On-Screen-Display menu,
[ ] button
5
Press to decrease the adjustment while OSD menu is on, or
decrease the audio output level while OSD menu is off.
[ ] button
6
Press to move the highlight bar up to adjust the selected item while
OSD menu is on.
[ ] button
7
Press to move the highlight bar down to adjust the selected item
while OSD menu is on.
[
MENU] button
8
Press to return to previous menu while OSD menu is on, or to
activate the OSD menu when OSD menu is off.
9
MUTE INPUT
1
2
3
4
5
6
MENU
7
8
NOTE:
"Keyboard Control Lock Mode" This function completely
disables the access to all Keyboard Control functions. To
enable or disable the keyboard control lock, press both [ ]
and [ ] buttons and hold down continuously for more than
3 (three) seconds.
Remote control sensor and power status indicator
9
•
Receives command signals from the remote control.
•
Indicates the operating status of the display without OPS:
- Lights green when the display is turned on
- Lights red when the display is in standby mode
- Lights amber when the display enters APM mode
- When {SCHEDULE} is enabled, the light blinks green and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned off
•
Indicates the operating status of the display with OPS:
- Lights green when the display is on, but the OPS is off
- Lights blue when the display and the OPS is on
- Lights red when the display is in standby mode
- Lights amber when the display enters APM mode
- When {SCHEDULE} is enabled, the light blinks green and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned off
4