Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst Petunjuk Pembongkaran & Penyiapan - Halaman 17

Jelajahi secara online atau unduh pdf Petunjuk Pembongkaran & Penyiapan untuk Perangkat lunak Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst. Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst 28 halaman. Warranty statement
Juga untuk Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst: Brosur (1 halaman), Memulai (13 halaman), Brosur & Spesifikasi (8 halaman), Manual Jaringan (46 halaman), Manual (12 halaman), Garansi Terbatas (12 halaman)

Halaman Cetak

Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst Petunjuk Pembongkaran & Penyiapan

1. Setting up the Printer

3. Fasten the bottom of the printer and the

printer mount with wing screws (L) and

washers (M)

4. This completes the mounting procedure.

Make sure the printer and the Stand are

fastened together securely.

Attaching the Paper Basket

1. Insert the basket hooks into the slots on the

rotary boards attached to the bottom

horizontal strut. The top ends of the basket

hooks should be facing downward.

2. Snap the rear paper basket joints onto the tips

of the basket hooks at the rear of the Stand.

Make sure the joints are positioned as shown.

3. Rotate the front paper basket joints to enfold

the bar which is not attached to the fabric as

shown (N). Then, snap the front paper basket

joints onto the tips of the basket hooks at the

front of the Stand. Make sure the joints are

positioned as shown (O).