Epson Stylus Scan 2000 Manual - Halaman 29

Jelajahi secara online atau unduh pdf Manual untuk Perangkat lunak Epson Stylus Scan 2000. Epson Stylus Scan 2000 35 halaman. Scanning application force quits on mac os 10.4 release of twain pro driver 2.10a;
Juga untuk Epson Stylus Scan 2000: Panduan Pengguna (7 halaman), Lembar Informasi Produk (4 halaman), Mulai Cepat (4 halaman), Panduan Informasi Produk (13 halaman), Lembar Informasi Produk (4 halaman), Buletin Dukungan Produk (12 halaman), Spesifikasi (2 halaman), Manual (11 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (14 halaman), Panduan Pengguna (24 halaman), Panduan Online (10 halaman)

Hold down the

button ( in the illustration below) to turn on the EPSON Stylus Scan. Then release

both buttons. The Stylus Scan starts printing a nozzle check page.

Here are sample printouts.

Good sample

If the nozzle check page does not print satisfactorily (for example, if any segment of

the printed lines is missing), then clean the print head as explained below. If the printout

was satisfactory, you are ready to print your first page. See "Printing Your First Page"

on page 31 for instructions.

Cleaning the Print Head

Make sure that the

out lights are off.

Hold down the

The Stylus Scan starts cleaning the print head and the

flashing. Print head cleaning takes about one minute to complete.

Checking the Stylus Scan

load/eject button ( in the illustration below) and press the

power light is on and that both the

cleaning button for three seconds, then release it.

Print head needs to be cleaned

segments are missing

black and

power light begins

power

color ink