Epson Stylus Scan 2000 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Epson Stylus Scan 2000. Epson Stylus Scan 2000 24 halaman. Scanning application force quits on mac os 10.4 release of twain pro driver 2.10a;
Juga untuk Epson Stylus Scan 2000: Panduan Pengguna (7 halaman), Lembar Informasi Produk (4 halaman), Mulai Cepat (4 halaman), Panduan Informasi Produk (13 halaman), Lembar Informasi Produk (4 halaman), Buletin Dukungan Produk (12 halaman), Spesifikasi (2 halaman), Manual (11 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (14 halaman), Manual (35 halaman), Panduan Online (10 halaman)

Note:

If you have more than one USB hub connected to your computer, connect the

Stylus Scan to the hub that is connected directly to your computer. If the EPSON

Stylus Scan does not work properly when connected to the hub, connect it

directly to the computer's USB connection. To connect your Stylus Scan via a

USB hub, follow the instructions given in the online Setting Up Guide.

Follow the on-screen instructions to install the printer and scanner drivers. When

requested to do so, type E:\EPSON\ENGLISH (or your preferred language) in the

Copy files from box and click OK. If your CD-ROM has a drive letter other than

E, substitute the appropriate letter.

During the driver installation, the EPSON Screen Calibration utility starts

automatically.

Note:

Be sure to calibrate your screen and Stylus Scan to ensure that the colors of

reproduced images closely match the originals.

10. In the following window, move the slider to the right or left until the two shades

of gray horizontal stripes match.

Note:

The gray stripes will not perfectly blend together; however, try to make the two

tones match as closely as possible.

11. Click OK to register the calibration setting.

12. Follow the on-screen instructions to complete the installation.

Note:

Do not change the device name (leave it as Stylus Scan 2000), otherwise your

Stylus Scan does not work correctly.

Installing the Software in Your Macintosh

To print and scan with your Stylus Scan, you need to install the following software

included on the EPSON Stylus Scan 2000 Software for Macintosh CD-ROM

shipped with your Stylus Scan. This software must be installed before connecting the

Stylus Scan to your Macintosh.

Setting Up Your Stylus Scan 2000