MSI 3BB3 Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor MSI 3BB3. MSI 3BB3 23 halaman.

Safety Instructions

∙ Read the safety instructions carefully and thoroughly.

∙ All cautions and warnings on the device or User Guide should be noted.

∙ Refer servicing to qualified personnel only.

Power

∙ Make sure that the power voltage is within its safety range and has been adjusted

properly to the value of 100~240V before connecting the device to the power outlet.

∙ If the power cord comes with a 3-pin plug, do not disable the protective earth pin

from the plug. The device must be connected to an earthed mains socket-outlet.

∙ Please confirm the power distribution system in the installation site shall provide

the circuit breaker rated 120/240V, 20A (maximum).

∙ Always disconnect the power cord or switch the wall socket off if the device would

be left unused for a certain time to achieve zero energy consumption.

∙ Place the power cord in a way that people are unlikely to step on it. Do not place

anything on the power cord.

∙ If this device comes with an adapter, use only the MSI provided AC adapter approved

for use with this device.

Environment

∙ To reduce the possibility of heat-related injuries or of overheating the device, do not

place the device on a soft, unsteady surface or obstruct its air ventilators.

∙ Use this device only on a hard, flat and steady surface.

∙ To prevent the device from tipping over, secure the device to a desk, wall or fixed

object with an anti-tip fastener that helps to properly support the device and keep it

safe in place.

∙ To prevent fire or shock hazard, keep this device away from humidity and high

temperature.

∙ Do not leave the device in an unconditioned environment with a storage temperature

above 60℃ or below -20℃, which may damage the device.

∙ The maximum operating temperature is around 40℃.

∙ When cleaning the device, be sure to remove the power plug. Use a piece of soft

cloth rather than industrial chemical to clean the device. Never pour any liquid into

the opening; that could damage the device or cause electric shock.

∙ Always keep strong magnetic or electrical objects away from the device.