Toshiba MJ-1101 Adendum Manual Layanan - Halaman 13
Jelajahi secara online atau unduh pdf Adendum Manual Layanan untuk Semua dalam Satu Printer Toshiba MJ-1101. Toshiba MJ-1101 17 halaman. Supplement to the troubleshooting section
Halaman Cetak
Error code
Phenomenon
Possible cause
CB31
- The movable tray is
1. False detection of the movable
lifted up after the
tray paper-full sensor due to its
power is turned ON.
deformed/damaged actuator (The
An error occurs when
actuator not ejected)
it stops at the upper
limit position.
(Initialization does not
finish.)
- The movable tray is
lowered after the
power is turned ON.
An error occurs before
it is lowered to the
specified position.
(Initialization finishes.)
2. False detection caused by the
removed actuator spring of the
movable tray paper-full sensor
(The actuator not ejected)
3. Improper installation of the
movable tray
(An error occurs if the actuator of
the movable tray paper-full sensor
cannot be pushed due to the
improper installation of the
movable tray.)
Items to confirm / Countermeasures
If the actuator cannot be ejected due to its deformation or damage, replace ACTR-01-SNSR-VER01-TRAY.
Normal
Reinstall SPG-ACTR-01-TRAY if it is removed.
Normal
The movable tray may not be installed properly (the stay of the movable tray may run on the boss). Reinstall the
movable tray.
Movable tray stay
Screwed
Normal
Abnormal
Not ejected
Abnormal
Not ejected
Abnormal
Run on the boss
Precautions / Remarks