Toshiba SD-190ESE Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Pemutar DVD Toshiba SD-190ESE. Toshiba SD-190ESE 10 halaman. Dvd video player
Juga untuk Toshiba SD-190ESE: Panduan Pemilik (10 halaman)

Halaman Cetak

Basic playback

Playing a disc

This section shows you the basics on how to play a disc.

DVD

Basic playback

VCD

Preparations:

• When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD. This may

include video or component video inputs which are exclusive to DVD playback.

• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input

connected to the DVD.

Press ON/STANDBY (I /

The DVD turns on and the Power

indicator lights.

"Reading" display will change to

"No Disc".

(If DVD disc has already loaded,

playback will start automatically.)

No Disc

Press OPEN/CLOSE.

The disc tray opens.

Place the disc on the disc tray.

With the playback

side down

• There are two different disc sizes. Place the disc

in the correct guide on the disc tray. If the disc is

out of the guide, it may damage the disc and

cause the DVD to malfunction.

• Do not place a disc which is unplayable in this

DVD.

Basic playback

Playing a disc (continued)

You can play discs at various speeds.

DVD

Playing in fast reverse or fast forward directions

VCD

Press REV or FWD during playback.

REV: Fast reverse playback

4-8

.9,

FWD: Fast forward playback

Each time you press the REV or

FWD button, the playback speed

changes.

Playing frame by frame

DVD

VCD

Press PAUSE/STEP during still playback.

Each time you press the PAUSE/

PAUSE/STEP

STEP button, the picture advances

one frame.

DVD

Playing in slow-motion

VCD

Press SLOW (

) Forward or SLOW (

) Reverse

during playback.

SLOW

Each time you press the button, the

slow-motion speed changes.

DVD

Locating a chapter or track

VCD

Press SKIP

repeatedly to display the chapter or track number you want.

Playback starts from the selected chapter or track.

SKIP

To locate succeeding chapters or

tracks.

Notes:

• A "Prohibition" symbol

may appear at the upper left of the screen. This symbol means either the feature you tried is not

available on the disc, or the DVD can not access the feature at this time. This does not indicate a problem with the DVD.

• The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave

the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent

damage to your television screen. Projection televisions are very susceptible.

CAUTION

Keep your fingers well clear of the disc tray as it is closing.

Neglecting to do so may cause serious personal injury.

Power indicator

2, 4

4 5

Press OPEN/CLOSE or PLAY on the unit.

The disc tray closes automatically.

On the TV-screen, "

" changes to

"Reading" and then playback

commences.

Reading

• A menu screen will appear on the TV screen, if

the disc has a menu feature.

Press C/D or B/A to select title, then press

ENTER. Title is selected and play commences.

Press STOP to end playback.

Resuming facility

• The unit records the stopped point,

depending on the disc. "

appears on the screen. Press

PLAY to resume playback (from

the scene point).

• If you press STOP again or unload

the disc ("

" appears on the

screen.), the unit will clear the

stopped point.

To start playback in the stop mode

Press PLAY.

SLOW

PAUSE/STEP

REV

PLAY

FWD

SKIP

To resume normal playback

Press PLAY.

PLAY

Notes:

• The DVD video player mutes sound and subtitles during

reverse and forward scan of DVD/VCD video discs.

However, this unit plays sound during fast forward or fast

reverse play of audio CDs.

• The playback speed may differ depending on the disc.

To resume normal playback

Press PLAY.

PLAY

Note:

The sound is muted during frame by frame playback.

To resume normal playback

Press PLAY.

PLAY

Notes:

• The sound is muted during slow-motion playback.

• The Video CD can not play Reverse Slow.

SKIP

Playback starts from the beginning of

the current chapter or track.

When you press twice in quick successions,

playback starts from the beginning of

the preceding chapter or track.

To obtain a higher quality picture

POWER

Occasionally, some picture noise not usually visible during a normal broadcast

OPEN/CLOSE

may appear on the TV screen while playing a DVD video disc because the high

resolution pictures on these discs include a lot of information. While the amount of

noise depends on the TV you use with this unit, you should generally reduce the

PAUSE/STEP

sharpness adjustment on your TV when viewing DVD video discs.

PLAY

About

DVD

VCD

The

DVD

VCD

STOP

function described under that heading.

: You can use this function with DVD video discs.

ENTER

DVD

: You can use this function with Video CDs.

VCD

C/D/B/A

: You can use this function with Audio CDs and CD-R/RW CDs.

To pause playback (still mode)

Press PAUSE/STEP during playback.

To resume normal playback, press

PAUSE/STEP

PLAY.

• The sound is muted during still

mode.

To stop playback

Press STOP.

STOP

Notes:

• If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV screen

according to the type of loaded disc. In this case, check your disc again (see pages 6 and 34).

• Some discs may take a minute or so to start playback.

• When you set a single-faced disc label downwards (ie. the wrong way up) and press the OPEN/CLOSE button or the PLAY

button on the unit, "Reading" will appear on the display for 30 seconds and then "Incorrect Disc" will continue to be displayed.

• Some discs may not work the resuming fac lity.

• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 26.

• Some playback operations of DVDs may be intentionally fixed by software producers. Since this un t plays DVDs according

to the disc contents the software producers designed, some playback features may not be available. Also refer to the

instructions supplied with the DVDs.

• Do not move the unit during playback. Doing so may damage the disc.

• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may

cause the unit to malfunction.

• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to

malfunction.

• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen

menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the

ON/STANDBY (I /

) button on your remote control once the movie is completed.

• There may be a slight delay between you pressing the button and the function activating.

Advanced playback

Zooming/Locating desired scene

DVD

Zooming

VCD

This unit will allow you to zoom in on the frame image. You

can then make selections by switching the position of the

frame.

Press ZOOM during playback.

The centre part of the image will be

ZOOM

zoomed in.

Each press of ZOOM will change the

ZOOM as follows.

DVD

(x 1 3)

(x 1 5)

(x 2 0)

Video CD/

(x 1 3)

(x 1 5)

(x 2 0)

JPEG CD

Note:

In case of the Video CD recorded with

PAL colour system,

3 (x 2.0)

zooming does not work.

Press C C C C C /D D D D D /B B B B B /A A A A A to view a different part of the

frame.

You may move the frame from the

centre position to UP, DOWN, LEFT or

ENTER

RIGHT direction.

In the zoom mode press ZOOM repeatedly to

return to a 1:1 view (

Off).

ZOOM

Notes:

• You can select the Pause, Slow or Search playback in the zoom

mode.

• Some discs may not respond to zoom feature.

icons on the heading bar show the playable discs for the

To remove the disc

Press OPEN/CLOSE.

Remove the disc after the disc tray

opens completely.

OPEN/CLOSE

Be sure to press OPEN/CLOSE to close the disc tray

after you remove the disc.

Screen saver function

The screen saver operates when you leave the unit in

DVD stop mode for approx. five minutes.

The screen will repeatedly get dark gradually and back

to normal.

DISPLAY

0–9

SEARCH (JUMP)

ZOOM

CLEAR (CANCEL)

ENTER

C/D/B/A

DVD

Locating desired scene

VCD

Use the title, chapter and time recorded on the disc to locate

the desired point to play back.

To check the title, chapter and time, press DISPLAY.

Press SEARCH (JUMP) during playback or stop

mode.

Jump

Time

(JUMP)

Title

Chapter

/Enter/0

9/Cancel/Jump

Press C C C C C or D D D D D to select the "Time", "Title" or

"Chapter".

Jump

Time

Title

ENTER

Chapter

/Enter/0

9/Cancel/Jump

Press Number buttons (0–9) to change the

number.

Jump

Time

Title

Chapter

/Enter/0

9/Cancel/Jump

• If you input a wrong number, press

CLEAR (CANCEL).

• Refer to the package supplied with

the disc to check the numbers.

Press ENTER. Playback starts.

• When you change the title,

playback starts from Chapter 1

of the selected title.

ENTER

• Some discs may not work in the

above operation.

Note:

In case of the Video CD playback with PBC, the Search (Jump)

function does not work. To turn off PBC, see page