Philips BM50 Panduan Pengguna - Halaman 20
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem stereo Philips BM50. Philips BM50 28 halaman.
Juga untuk Philips BM50: Panduan Pengguna (28 halaman)
Halaman Cetak
Listen through a headphone
•
Plug a headphone (not supplied) into the
socket.
Update firmware
Warning
•
Always connect the speaker to AC power for firmware
upgrade.
•
Never power off the speaker or unplug the USB mass
storage device before completion of the firmware
upgrade.
Note
•
Make sure that the USB stick is FAT16/32 formatted.
1
On your PC/Mac, go to www.philips.com/
support.
EN
18
2
Enter the model number to find the latest
firmware upgrade file available.
www.philips.com/support
3
Unzip and save the upgrade file (BM50.bin)
to the root directory of a USB stick.
4
Press USB to select the USB source, then
plug the USB stick into the USB socket on
the back of the speaker.
5
Disconnect the AC power of the speaker.
6
Connect AC power again and turn on the
speaker.
7
Do not remove the USB stick, and wait for
around 3 to 4 minutes for completion of
the firmware upgrade.
» During firmware upgrade, 'UPGRADE'
is shown on the display panel.
» At completion of firmware upgrade,
'SUCCESS is shown on the display
panel.
XXXX
XXXX. zip