Philips BTM5000 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem stereo Philips BTM5000. Philips BTM5000 22 halaman. Micro system
Juga untuk Philips BTM5000: Panduan Cepat (3 halaman)

Halaman Cetak

Set clock

Note
•
You can set the clock in standby mode only.
1
In standby mode, press and hold CLOCK
SET on the remote control to activate the
clock setting mode.
» [CLOCK SET] (clock set) is displayed
briefly.
» The 12 hour or 24 hour format is
displayed.
2
Press PRESET/ALBUM
hour or 24 hour format.
3
Press CLOCK SET to confirm.
» The hour digits begin to blink.
4
Press PRESET/ALBUM
hour.
5
Press CLOCK SET to confirm.
» The minute digits begin to blink.
6
Press PRESET/ALBUM
minute.
7
Press CLOCK SET to confirm.
Note
•
You can also press VOL -/+ on remote control, or
/
, VOLUME on the main unit to set hour format/
hour/minute.
•
To exit clock setting mode without storing, press
/MENU.
•
If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.

Turn on

•
Press .
» The unit switches to the last selected
source.
/
to select 12
/
to set the
/
to set the
Switch to standby
•
Press
again to switch the unit to standby
mode.
» The clock (if set) appears on the
display panel.
Switch to ECO Power mode:
•
Press and hold
seconds.
» [ECOPOWER] (Eco Power) is
displayed briefly.
Tip
•
The unit switches to Eco Power mode after 15 minutes
in standby mode.
Switch between standby mode and Eco Power
mode:
•
In standby/Eco Power mode, press and
hold
to switch the unit to Eco Power/
standby mode.
Demonstrate the unit's
features
•
In standby mode, press
[WELCOME TO PHILIPS] (welcome to
Philips) scrolls from the right to the left on
the display, and then [DEMO ON] (demo
on) is displayed briefly.
» This system's features are displayed
one by one.
• To turn off the demonstration, press
/MENU again.
for more than three
/MENU until
EN
9