Philips DCB2077 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem stereo Philips DCB2077. Philips DCB2077 22 halaman. Dock for ipod/iphone/ipad, dab+
Juga untuk Philips DCB2077: Spesifikasi (3 halaman)

Halaman Cetak
Philips DCB2077 Panduan Pengguna
Store DAB+ radio stations
automatically
Tip
•
New stations and services will be added in the DAB+
broadcast. To check for newly available DAB+ stations
and services, perform full scan regularly.
In DAB+ mode, press SCAN.
» The system stores all the available DAB+
radio stations automatically.
» After full scan, the first available station is
broadcast.
Store DAB+ radio stations
manually
You can store up to 20 DAB+ radio stations.
1
Tune to a DAB+ radio station.
2
Press and hold PROG for 3 seconds to
activate the storing mode.
3
Press
/ to select a number.
4
Press PROG to confirm.
5
Repeat steps 1-4 to store other DAB+
stations.
Note
•
To remove a pre-stored DAB+ radio station, store
another station in its place.
Listen to a preset DAB+
radio station
In DAB+ mode, press / repeatedly to
select a preset channel number.
EN
14

Use DAB+ menu

1
In DAB+ mode, press MENU to access
DAB+ menu.
2
Press
/
to scroll through the menu
options:
• [STATION LIST] (station list): Tune
to a DAB+ radio station from a list of
available DAB+ stations, or scan DAB+
stations if no station is stored in the list.
• [FULL SCAN] (full scan): Scan and
store all available DAB+ radio stations.
• [MANUAL TUNE] (manual tune):
Tune to a specific channel/frequency
manually.
• [PRUNE] (prune): Remove invalid
stations from the station list.
• [SYSTEM] (system): Adjust system
settings (see 'Other features - Use
system menu').
3
Press OK to select an option.
4
Repeat steps 2-3 if sub-option is available
under one option.
Note
•
If the system is idle for 10 seconds, the menu exits.

Show DAB+ information

While listening to DAB+ radio, press
RDS/DISPLAY repeatedly to scroll through the
following information (if available):
» Station name
» Dynamic Label Segment (DLS)
» Signal strength
» Program type (PTY)
» Ensemble Name
» Frequency
» Signal error rate
» Bitrate
» Codec
» Time and date