Philips DCB3070 - Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem stereo Philips DCB3070 -. Philips DCB3070 - 25 halaman. User manual
Juga untuk Philips DCB3070 -: Panduan Memulai Cepat (2 halaman), Panduan Pengguna (22 halaman), Brosur (3 halaman), Panduan Pengguna (2 halaman), Panduan Pengguna (22 halaman), Panduan Pengguna (22 halaman)

Halaman Cetak
Philips DCB3070 - Panduan Pengguna

3 Get started

Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
rear of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Placement

You can place the unit on a flat surface or
mount the unit on a wall.
Mount on a wall
To wall mount the unit, see the included
separate sheet of wall mounting instructions.

Prepare the remote control

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine, or fire. Never discard batteries in fire.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
EN
12
Note
•
If you are not going to use the remote control for a
long time, remove the batteries.
•
Do not use old and new or different types of batteries
in combination.
•
Batteries contain chemical substances, so they should
be disposed of properly.

Connect power

Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the rear of the main unit.
•
Before connecting the AC cord, make sure that you
have completed all other connections.
Note
•
The type plate is located on the rear of the main unit.
1
Connect the AC power cable to:
the AC MAINS connector on the rear
•
of the unit.
•
the wall socket.

Store DAB stations

When you connect AC power and no DAB
stations are stored, the unit prompts you to
search and store all the available DAB stations.
1
Connect the unit to the power supply.
» [FULL SCAN](full scan) is displayed.