Philips DCM1070 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem stereo Philips DCM1070. Philips DCM1070 20 halaman. Profesionální televizor flat tv s technologií crystal clear iii 20" lcd
Juga untuk Philips DCM1070: Manual (18 halaman), Spesifikasi (3 halaman), Spesifikasi (Ceko) (2 halaman)

Halaman Cetak
Philips DCM1070 Panduan Pengguna

Auto install radio stations

When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
» [AUTO INSTALL - PRESS PLAY-
STOP CANCEL] (press
automatic installation, or press
cancel) is displayed.
2
Press
on the main unit to start
installation.
» The unit automatically stores radio
VWDWLRQV ZLWK VXIÀFLHQW VLJQDO VWUHQJWK
» When all the available radio stations
DUH VWRUHG WKH ÀUVW SUHVHW UDGLR VWDWLRQ
is broadcast automatically.

Set clock

Note
‡
You can set the clock in standby mode only.
1
Press
to switch the unit to standby.
2
Make sure that --:-- (or clock) is displayed.
3
Press and hold PROG/CLOCK SET to
activate the clock setting mode.
» [CLOCK SET] (clock set) is displayed.
» The 12 hour or 24 hour format is
displayed.
12
EN
4
Press
or 24 hour format.
5
Press PROG/CLOCK SET.
» The hour digits begin to blink.
6
Press
7
Press PROG/CLOCK SET.
» The minute digits begin to blink.
8
Press
9
Press PROG/CLOCK SET WR FRQÀUP
‡
To exit clock setting mode without storing, press
‡
If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
‡
If clock is not manually set, when iPod/iPhone is
connected, the unit synchronizes time from the iPod/
iPhone automatically.
to start
to

Demonstrate features

In the standby mode, press .
» [WELCOME TO PHILIPS] (welcome
» [DEMO ON] (demo on) scrolls on
» The feature names are displayed one
‡
» [DEMO OFF] (demo off) scrolls on
/
or VOL -/+ to select 12 hour
/
or VOL -/+ to set the hour.
/
or VOL -/+ to set the minute.
Note
to Philips) scrolls on the display.
the display.
by one.
To exit the feature demonstration,
press
again.
the display.
.