Toshiba SD3010KB Panduan Pemilik - Halaman 19
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pemutar DVD Toshiba SD3010KB. Toshiba SD3010KB 26 halaman. Upscaling dvd player
Juga untuk Toshiba SD3010KB: Panduan Pemilik (26 halaman)
Halaman Cetak
Using the Video setup menu
Press SETUP on the remote control.
A
The system setup menu appears.
Language
Aspect Ratio
Aspect Ratio
Aspect Ratio
:
:
:
16:9
View Mode
View Mode
View Mode
:
:
:
Auto Fit
Auto Fit
Auto Fit
TV System
:
PAL
Video
Video Out
:HDMI
Smart Picture
:
Standard
Audio
HD Resolution
:Auto
JPEG Interval
:
5 Seconds
Rating
Misc
Press / to select { Video }, then press
B
Press / to select an item, then press to
C
access.
Example: { Video Out }
The options for the selected item appears.
If the selection in the menu is greyed out, that
means the feature is not available or not possible to
change at the current state.
Use / to select a setting and press OK to
D
confirm.
Example: { RGB }
The setting is selected and setup is completed.
To exit, press SETUP.
E
Aspect Ratio
The picture shape can be adjusted to fit your TV and
the format must be available on the playback disc.
Otherwise, the TV display will not affect the picture
during playback.
In ' Video ', press / to select {Aspect Ratio },
A
then press .
{ 4:3 }
Select this if you have a normal TV. A 'wide-screen'
source display with black bars on the top and bottom
will be displayed on the TV screen.
{ 16:9 }
Select this for wide-screen TV (frame ratio 16:9).
Use / to select a setting and press OK to
B
confirm.
View Mode
Use view mode to scale an image that fits to the TV
screen's width and height.
In ' Video ', press / to select { View Mode },
A
then press .
{ Fill }
Fill the screen with decoded image.
{ Original }
Display image as its original size.
{ Height Fit }
Fit the screen height with image height.
{ Width Fit }
Fit the screen width with image width.
{ Auto Fit }
Automatically display the decoded image on screen
at a suitable size.
{ Pan Scan }
Automatically display decoded image on full screen
without distortion.
Helpful hint: Press to go back to previous menu item.
Press SETUP to exit the menu item.
4:3
4:3
DVD Menu Options
Use / to select a setting and press OK to
B
confirm.
Tip:
-Depending on the type of disc, you may not be able
to view the mode as selected.
TV System
The video standard of the DVD player output can be
selected from "NTSC", "PAL" or "Multi".
{ NTSC }: Select if your TV system is NTSC.
{ PAL }: Select if your TV system is PAL.
{ Multi }: The DVD video player automatically
identifies PAL or NTSC video system of a disc.
Connect a multisystem TV (PAL/NTSC compatible) to
view a picture.
A playback picture may be distorted when detected a
signal change between PAL and NTSC on the disc.
With the disc tray opened, you can also press
number button "3" to switch between "NTSC" and
"PAL".
Video Out
The video output of the DVD player can be selected
as "RGB" or "HDMI".
In ' Video ', press / to select { Video Out }, then
A
press .
{ RGB }
Select this for Scart connection.
{ HDMI }
Select this for HDMI output.
Use / to select a setting and press OK to con-
B
firm.
When SCART and HDMI cable are connected at
the same time, "HDMI" will be automatically selected
as the output of the DVD player. You cannot switch
to "RGB". Composite video will be output for scart
output. To select "RGB" output, simply disconnect
the HDMI cable. The video output will be switched to
"RGB".
Smart Picture
This DVD player provides four predefined sets of
picture color settings.
In ' Video ', press / to select {Smart Picture },
A
then press .
{ Standard }
Select this for a preset standard picture setting.
{ Vivid }
Select this to make the picture brighter.
{ Cool }
Select this to make the picture softer.
{ Personal }
Select this to personalize your picture color by
adjusting the brightness, contrast, tint and color
(saturation).
Use / to select a setting and press OK to
B
confirm.
If you select { Personal }, then proceed to steps
C
D~G.
The setup menu appears.