Philips DCM3100 Panduan Pengguna - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem stereo Philips DCM3100. Philips DCM3100 26 halaman. Classic micro sound system, dock for ipod/iphone, 60 w
Juga untuk Philips DCM3100: Panduan Memulai Cepat (2 halaman), Panduan Pengguna (26 halaman), Brosur & Spesifikasi (3 halaman), Panduan Servis (35 halaman), Panduan Servis (35 halaman)
Halaman Cetak
7 Listen to FM
radio
Tune to an FM radio station
Note
Make sure that you have connected and fully extended
the FM antenna.
1
Press SOURCE repeatedly to switch the
source to
.
Press and hold
starts to change.
»
blinks until the FM tuner tunes
to a station with strong reception.
7R WXQH WR D VWDWLRQ DW D VSHFLÀF
frequency, press
until the desired frequency is displayed.
Tip
In FM mode, you can press OK repeatedly to switch
the sound setting between
(monophonic).
Program radio stations
automatically
Note
You can program a maximum of 20 preset radio stations.
Press and hold PROG until
» All available stations are programmed
in the order of waveband reception
strength.
» 7KH ÀUVW SURJUDPHG UDGLR VWDWLRQ LV
broadcast automatically.
18
EN
/
until the frequency
/
repeatedly
(stereo) and
blinks.
Program radio stations
manually
Note
You can program a maximum of 20 preset radio
stations.
To overwrite a programmed radio station, store
another one with its sequence number.
1
Tune to a radio station.
Press PROG to activate programming.
»
XX (XX indicates the
sequence number) blinks.
3
Press
/
or
/
sequence number from 1 to 20 to this
radio station, and then press PROG to
FRQÀUP
» The preset sequence number and
the frequency of this radio station are
displayed.
4
Repeat steps 1-3 to program more
stations.
Tune to a preset radio station
Press
/
or
/
sequence number of that preset radio
station.
Enter its sequence number with numeric
keypad.
to allocate a
to select the