MSI ARMOR Series Panduan Pengguna Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna Cepat untuk Kartu Video MSI ARMOR Series. MSI ARMOR Series 11 halaman.

System Requirements

1. Expansion Slot: Motherboard with one or above PCI Express x16 slot

2. Monitor: With an input connector equivalent to the output

connector of your graphics card.

3. Operation System: Windows® 7 or later

4. Optical Drive device Auxiliary Tools

1. Cross-screwdriver: This can be used to do most of the installation.

Choose one with a

2. Pliers: This can be used as an auxiliary tool to pull out the power

connectors or remove the brackets.

3. Rubber gloves: This can prevent you from being incised and suffering

the static charge.

Hardware Installation

1. Turn off the power and remove the case of your computer. Remove

the bracket which may obstruct your Graphics card.

2. Put the card directly over the PCI EXPRESSslot and press one end of

the card into theslot first. Gently but firmly press the other end until it

is fully seated in the slot. Secure the card with a bracket screw.

3. Connect to 6/8-pin power connectors (if any). 4. Replace the case

and connect the output and the monitor with the display cable.

Software Installation

1. Turn on your computer.

magnetic head would be better.

(depends on the product)