Philips DS9800W/37 Panduan Pengguna - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem stereo Philips DS9800W/37. Philips DS9800W/37 25 halaman. Docking speaker system
Juga untuk Philips DS9800W/37: Panduan Memulai Cepat (2 halaman), Panduan Pengguna (31 halaman), Panduan Servis (36 halaman)

Halaman Cetak
Philips DS9800W/37 Panduan Pengguna
Stream from your Wi-Fi enabled PC
or Mac installed with iTunes 10
Note
•
Before you open iTunes, make sure that you have
enabled Bonjour service in your PC. To enable the
service, you can click Start->Settings->Control Panel,
and double-click Administrative Tools-> Services-
>Bonjour Service, then click Start followed by OK on
the pop-up menu.
1
Open iTunes 10.
2
Click the AirPlay icon at the bottom right
corner of the window.
3
Select Philips_Fidelio XXXX (or user
customized name) from the list.
4
Select a media file and start play.
5
Wait until successful audio streaming to
the speakers.

Control play

You can select different play options from either
your AirPlay device or the supplied remote
control.
Note
•
All the operations below are based on the supplied
remote control.
•
To start or pause play, press
•
To skip to the previous or next track, press
/ .
•
To adjust volume, press
•
To mute or restore volume, press
•
To switch to the MP3 link source (if
connected), press .
•
To switch back to the AirPlay device
source, press .
.
+/- repeatedly.
.

Advanced sound settings

For advanced sound settings and additional
features, you can use your AirPlay device to
download the Philips Fidelio application from
Apple App Store.
Update firmware
Note
•
You can only update the firmware from a PC/Mac.
Download the update file
1
On your PC/Mac, go to www.philips.com/
support.
2
Enter the model number to find the latest
firmware upgrade file available.
3
Save the upgrade file to your hard drive.
Update from the configuration page
1
Power on the SoundSphere speakers (see
'Prepare - Connect - Connect power -
Connect power to speakers').
»
It takes about 35 seconds for the
speakers to boot up. During boot-up,
the LED indicator on the back of the
main speaker blinks in green quickly.
»
After boot-up, the LED indicator starts
to blink in green slowly.
2
Make sure that your SoundSphere
speakers and PC/Mac are connected to
the same wireless router.
EN
21