Toshiba DP-SW25T Panduan Pemilik - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Toshiba DP-SW25T. Toshiba DP-SW25T 37 halaman. Data projector (svga / with pc card slot)

Halaman Cetak

Using the Wireless Utility (Continued)

Select the projector to be operated.

In the Remote Control window, click on the

select the desired projector from the pull-down list.

Only one projector can be selected. (It is not possible to operate

multiple projectors.)

Click on the Remote Control window's buttons.

The function of each button and box is as follows:

Power On: Turns projector power on.

Power Off: Turns projector power off.

Input (box) : Click on the

button, and select the desired input from the pull-down

list.

Go:

Switches to the input selected in the Input box.

Mute:

Cuts off picture and sound. Click again to restore picture and sound.

Freeze:

The picture is paused. Click again to release the freeze function.

+/–:

Adjust sound volume.

To quit, click on the

button on the Remote Control

window.

Performing this does not close the Wireless Utility window.

To exit both the Wireless Utility and the Remote Control, click on the

the Wireless Utility window.

■ Document camera function

The document camera function is available for the Toshiba LCD data projector TLP-T701/

T721/T501/T521/T521E.

For details, consult your local dealer.

button, and

button on

How to use the JPEG Conversion Tool

The JPEG Conversion Tool converts JPEG files not supported by the projector, image files

in other formats, Microsoft

PowerPoint

projector. The JPEG files converted with this tool can be displayed by sending them using

the wireless LAN PC card

p.52

, or saving them on a memory PC card

■ Launching the JPEG Conversion Tool

The window shown in the figure to the right appears on the

computer screen.

Drag the Image Quality Settings slider to the left or right to set the

image quality of the file after conversion. Lower values create

smaller files, but lower the image quality. (It is not possible to restore

the quality of an image after it has been lowered.)

■ Converting an image file

This converts JPEG files using compression formats not supported by the projector,

Windows

metafiles (wmf), and bitmapped files (bmp) into JPEG files.

(1) In the Conversion Method field, select Converting image

file. (Status on launch)

(2) In the File settings field, click on the Browse button for

Original Image File Name.

The Open dialog box appears.

(3) In the Open dialog box:

(a) Specify the location of the file to be converted; and

(b) In the Files of Type field, click on the

the file format. A list of files of that format appear in the

Open dialog box.

(4) In the Open dialog box, select the file to convert, then click

on the Open button.

(5) In the JPEG Conversion Tool window, in the File

settings field, select Browse for File name after

conversion. The Save As dialog box appears.

(6) In the Save As dialog box:

(a) Specify the location in which to save the converted

file;

(b) Enter a file name of up to 8 characters in the File

Name field; and

(7) (a) In the JPEG Conversion Tool, click on the

Conversion button.

(b) A confirmation dialog box opens. Click Yes.

The computer converts the file. When it finishes a

message appears informing you that a JPEG file

has been created.

files, and the like into JPEG files supported by the

p.42

button to select

(7)-(a)

(3)-(a)

(3)-(b)

(6)-(a)

(6)-(b)

(7)-(b)

(1)

(2)

(5)

(4)

(6)-(c)