Toshiba Projector Manual - Halaman 32

Jelajahi secara online atau unduh pdf Manual untuk Proyektor Toshiba Projector. Toshiba Projector 43 halaman.

Settings menu

Audio: allows adjustments to Volume of the internal speaker. Adjustments

can also be made from the projector's keypad.

Audio

Sources: allows you to assign a particular input (Computer 1, Video 1, and

Video 2) to a specific source key on the remote and enables or disables Auto-

source. When Autosource is not checked, the projector defaults to the last-

used source. If no source is found, a blank screen displays. When Auto-

source is checked, the projector checks the last-used source first at power

Sources

up. If no signal is present, the projector checks the sources in order until a

source is found or until power down.

Power-up

Source

Power-up Source determines which source the projector checks first for

active video during power-up. When the Autosource feature is On, the pro-

jector automatically finds the active source, checking the Power-up Source

first. The options are Computer 1 for a computer source, and Video 1 (for S-

video connections), and Video 2 (for composite video connections) for video

sources. When this feature is Off, the projector defaults to the source

selected in Power-up Source.

System menu

System: Rear reverses the image so you can project from behind a translu-

Screen Save

cent screen. Ceiling turns the image upside down for ceiling-mounted pro-

jection. Display Messages displays status messages (such as "Searching" or

"Mute") in the lower-left corner of the screen. NND prevents your notebook

computer from going into Screen Save mode. Power Save automatically

turns the lamp off after no signals are detected for 20 minutes. After an

additional 10 minutes with no signal, the projector powers down and can be

toggled off. If an active signal is received before the projector powers down,

the image will be displayed. When Power Save is enabled, Screen Save is

disabled. Screen Save automatically blanks the screen with a black color

after no signals are detected for a preset number of minutes. The image

returns when an active source is detected or a remote or keypad button is

pressed.