Toshiba TDP-D1-US Panduan Pemilik - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Toshiba TDP-D1-US. Toshiba TDP-D1-US 20 halaman. Toshiba tdp-d1-us: specifications
Juga untuk Toshiba TDP-D1-US: Spesifikasi (1 halaman)

Toshiba TDP-D1-US Panduan Pemilik
Specifications (Continued)
I CONTROL terminal
G Pin assignment
1
4
3
6
7
Mini DIN 8 pin connector
G Interface format
1 Communication method
2 Communication format
3 Data format
4 Replies
If commands are to be sent consecutively, wait for the replies from the projector before
sending the next command.
G Main Commands
Item
Power on
Power off
Icon display on
Icon display off
Auto setting (RGB input)
Status display on
Status display off
Note
• Contact your dealer for control cable and other commands.
I Separately Sold Product
Replacement Lamp
Note
• Design, specifications, etc. subject to change without notice for improvements, etc.
Pin No.
2
5
8
RS-232C, 9600bps, No Parity, Data Length: 8 bits;
Stop Bit Length:
STX (02h) Command (3Byte) ETX (03h)
Only 1 command valid per communication.
For input commands, only ASCII-compliant all-uppercase
alphanumeric characters supported.
Acknowledge ACK (06h) CR (0Dh) Data .... Succeed
No acknowledge NAK (15h)
Command
PON
POF
MO0
MO1
PAT
DON
DOF
Model NO.; for TDP-D1: TDPLD1, for TDP-D2: TDPLD2
Signal Name
1
RXD
2
CTS
3
DSR
4
GND
5
RTS
6
N.C
7
TXD
8
N.C
1 bit
ACK (06h) ESC (1Bh)
Computer input select
Y/P
/P
B
R
Video input select
S-video input select
38
Description
Receiving data
Consent to send
Data set ready
Signal ground
Request to send
No connection
Sending data
No connection
Item
input select
.... Failure
Command
IN1
IN2
IN3
IN4