Toshiba TDP-MT700 Panduan Pemilik - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Toshiba TDP-MT700. Toshiba TDP-MT700 34 halaman. Home theater projector
Juga untuk Toshiba TDP-MT700: Panduan Pemilik (36 halaman), Panduan Servis (49 halaman)

Halaman Cetak
Toshiba TDP-MT700 Panduan Pemilik

Additional information

Care of the projector

Your projector needs little maintenance. The only thing you have to do on a regular basis is keep the
lens clean. Never remove any parts of the projector except the lamp. Contact your dealer if other
parts needs replacing.
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface. Before you attempt to clean the lens,
turn the projector off, unplug the power cord, and leave it several minutes to cool completely.
1.
Use a canister of compressed air to remove dust. (Available from building hardware or photo-
graphic suppliers.)
2.
If there is stubborn dirt or smudge marks, use a proper photographic lens brush or moisten a
clean soft lens cloth with lens cleaner to gently wipe the lens surface.
Never touch the lens with your finger or rub the lens with abrasive materials. Even paper towels can dam-
age the lens coating. Only ever use a proper photographic lens brush, cloth, and cleaning solution. Do
not attempt to clean the lens whilst the projector is switched on or is still hot from previous use.
Cleaning the projector case
Before you attempt to clean the case, turn the projector off, unplug the power cord, and leave it sev-
eral minutes to cool completely.
1.
To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth.
2.
To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent. Then
wipe the case.
Never use wax, alcohol, benzene, thinner or other chemical detergents. These can damage the case.
Storing the projector
If you need to store the projector for an extended time, please:
1.
Make sure the temperature and humidity of the storage area are within the recommended range
for the projector. Please refer to the Spec. page in this manual or consult your dealer about the
range.
2.
Retract the adjuster feet.
3.
Remove the batteries from the remote control.
4.
Pack the projector in its original packing or equivalent.
Transporting the projector
It is recommended that you ship the projector with its original packing or equivalent. When you carry
the projector yourself, please use a soft carry case.

Replacing the lamp (Contact your dealer for assistance)

The lamp mat be very hot. Allow the projector to cool for at least 45 minutes before replacing the lamp.
This lamp contains mercury. Consult your local hazardous waste regulations to dispose of this lamp in a
proper manner.
1.
Turn the power off and disconnect the projector from the wall socket. Turn off all connected
equipment and disconnect all other cables.
30
Additional information