Epson V11H281020 - PowerLite 400W WXGA LCD Projector Panduan Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Perangkat lunak Epson V11H281020 - PowerLite 400W WXGA LCD Projector. Epson V11H281020 - PowerLite 400W WXGA LCD Projector 47 halaman. Warranty booklet
Juga untuk Epson V11H281020 - PowerLite 400W WXGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Panduan Tambahan (4 halaman), Panduan Pengaturan Cepat (6 halaman), Panduan Pengguna (1 halaman), Manual Pembaruan (4 halaman), Pernyataan Kesesuaian (4 halaman)

Halaman Cetak
Epson V11H281020 - PowerLite 400W WXGA LCD Projector Panduan Pengoperasian

Installing EasyMP Monitor

Installing EasyMP Monitor

Operating environment

This software is compatible with computers that comply with the
following requirements.
OS
Windows 98 Second Edition SP1
Windows Me
Windows NT4.0 SP6
Windows 2000 Professional SP4
The following 32-bit operating systems:
Windows XP Home Edition SP2/SP3
Windows XP Professional SP2/SP3
Windows Vista
(All editions except Starter Edition)
Windows Vista SP1/SP2
(All editions except Starter Edition)
Windows 7
(All editions except Starter Edition)
Internet Explorer Ver. 5.0 or later must be installed.
CPU
Pentium MMX 166 MHz or higher (Pentium II 233 MHz
or higher recommended)
Memory
64 MB or more (128 MB or more recommended)
capacity
Free hard disk
50 MB or more
space
Display
SVGA (800 x 600) or higher resolution, 32 bit or higher
display color
• Macintosh computers cannot be used.
• Operations carried out at the computer may become slow depending
on the number of projectors being managed. If this happens, use a
computer with higher specifications.
• EasyMP Monitor cannot be used in environments which do not allow
pings to be transmitted.

Supported language

EasyMP Monitor supports the following languages.
*1 If your OS is Windows Vista, you must update to Windows Vista SP1 to use
the Ukrainian version of EasyMP Monitor.
*2 Windows NT4.0 does not support Arabic and Hebrew versions.

Transferring the settings

If you are already using EasyMP or EMP Monitor, you can transfer the
projector settings to this version. The settings are stored as a data file
(EMP Monitor.dat). Make a copy of the EMP Monitor.dat before you
install this software. EMP Monitor.dat can be found at the following
location if the default settings were used to install the software:
7