Toshiba TDP-P75 Panduan Pemilik - Halaman 29

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Toshiba TDP-P75. Toshiba TDP-P75 45 halaman. 2,300 ansi-lumens contrast 2,000 : 1 ddr dmd technology
Juga untuk Toshiba TDP-P75: Spesifikasi (2 halaman)

Halaman Cetak

1. Connecting to a Computer

English

Shutdown

Press ON/STANDY and a

confirmation prompt displays. Press

ON/STANDY a second time to turn

the projector off.

The ON indicator flashes orange

and the lamp shuts down. The fans

will continue to run for approximately

90 seconds to cool down the

projector lamp.

• To protect the lamp, the projector will not

respond to any commands during the

cooling process.

• Do not unplug the power cord before the

projector shutdown sequence is

complete or during the 90-second cooling down process.

Note

• Note that a lamp characteristics may rarely cause the brightness to fluctuate

slightly.

• A lamp is consumable item. If used for extended periods, images will appear

dark, and the lamp could burn out. This is characteristic of a lamp, and is not

malfunction. (The lifetime of the lamp depends on conditions of use.)

• The DMD

black spots (pixels that do not light) or bright spots (pixels that are constantly lit)

on the panel. Please note that these are not malfunctions.

CAUTION

• Do not block the projection lens from projecting as this could cause the blocking

object to become heated and deformed.

• Do not look into the lens while the lamp is on. The strong light from the lamp may

cause damage to your eyes or sight.

• Do not block the air intake or exhaust. Doing so may cause damage to the

projector due to internal overheating.

• Do not place your hands, face, or other objects near the air exhaust. Doing so may

cause burns, deform/break the object.

is made using extremely advanced technology, but there may be

Press the [ON/STANDBY] button again to turn off.

Operation