Philips Fidelio AD7050W Panduan Pengguna - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem stereo Philips Fidelio AD7050W. Philips Fidelio AD7050W 30 halaman. Philips fidelio soundavia wireless speaker ad7050w with airplay
Juga untuk Philips Fidelio AD7050W: Panduan Memulai Cepat (2 halaman), Panduan Pengguna (29 halaman), Panduan Memulai Cepat (2 halaman)
Halaman Cetak
Tip
•
For some Wi-Fi routers, you may need to hold the
WPS button for Wi-Fi connection or enable the WPS
PBC function from the router configuration pages. See
the user manuals of the specific routers for details.
•
If the Wi-Fi SETUP indicator on AD7050W does not
turn solid green, it means that the Wi-Fi connection
has failed. Please wait for 2 minutes and try again. If the
problem remains, try to set up the Wi-Fi connection
manually (see 'Method 3: Connect to a non-WPS Wi-Fi
router' on page 10).
•
If the Wi-Fi connection fails again, restart AD7050W,
and then try again.
Method 3: Connect to a non-
WPS Wi-Fi router
Note
•
You can also follow the procedures below to connect
AD7050W to a WPS router manually.
To connect AD7050W to a Wi-Fi router
manually, you need access to AD7050W's
built-in configuration web page for change of
its internal Wi-Fi settings. To do so, you need a
Wi-Fi enabled device with an Internet browser
for temporary Wi-Fi connection to AD7050W.
The Wi-Fi enabled device can be an iPod touch/
iPhone/iPad or a Wi-Fi enabled PC/Mac.
Follow the sequence below for connection
of AD7050W to a non-WPS Wi-Fi router.
10
EN
1
Collect settings of your home Wi-Fi router
and write down on paper for use during
AD7050W Wi-Fi setup (see 'Collect
settings of your home Wi-Fi router' on
page 10).
2
Make sure that AD7050W is in Assisted
Wi-Fi Setup mode. If not, switch
AD7050W to Assisted Wi-Fi Setup mode
(see 'Switch AD7050W to Assisted Wi-Fi
Setup mode' on page 11).
» A new Wi-Fi network created by
AD7050W will appear, with the
network name (SSID) of Philips
AD7050W.
3
Connect your Wi-Fi enabled device to the
newly created Wi-Fi network temporarily
(see 'Connect your Wi-Fi enabled device
to the newly created Wi-Fi network' on
page 11).
4
Open the built-in web page of AD7050W
with the Internet Browser of your Wi-Fi
enabled device (see 'Open the built-in web
page of AD7050W' on page 13).
5
Change the internal Wi-Fi settings of
AD7050W based on the settings you
wrote on paper at step 1 (see 'Change the
internal Wi-Fi settings of AD7050W' on
page 14).
6
Restore your Wi-Fi enabled device back
to your existing home Wi-Fi settings (see
'Restore your Wi-Fi enabled device back
to your existing home Wi-Fi setting' on
page 16).
Collect settings of your home Wi-Fi
router
Note
•
Always consult the user manual of your home Wi-Fi
router for detailed instructions.