Toshiba TDP-SP1U - SVGA DLP Projector Panduan Pemilik - Halaman 26
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Toshiba TDP-SP1U - SVGA DLP Projector. Toshiba TDP-SP1U - SVGA DLP Projector 46 halaman. Tdp-sp1u user's guide
Halaman Cetak
Basic operations
1
Turn on the power.
Turn on the power by following the instructions in "Turning the power on"
2
Select the language (When using the first time).
When the projector is used for the first time after purchase, the start menu for lan-
guage (to display the menus and messages on screen) and configuration is displayed
in English. (if the screen is out of focus, adjust it according to the step
Use the
press the
Message for setup confirmation is displayed in a selected language.
English
French
German
Italian
Spanish
Portuguese
Russian
Swedish
Turkish
Romanian
Simplified Chinese
Notes
• When the projector is turned on the next time, the start menu does not appear upon
startup.
• The language can also be set via the Default setting menu
• This owner's manual assumes that English has been selected.
3
Activate the connected device.
Turn on and start the connected device such as a computer.
4
Press the INPUT button.
An image of the connected equipment is projected.
Each time you press the INPUT button, it switches to another source signal from the
equipment which is connected to the projector.
Notes
• When [Auto input search] is set to [On] in the Default setting menu
setting is [On]), the input is switched to the connected equipment that is outputting video
signals each time you press the INPUT button
• Right after the input source is switched to the other, the color of the image may change
slightly.
,
,
or
button to select the desired language and
button.
.
p.43
26
.
p.24
.)
6
Traditional Chinese
Polish
Indonesian
Norwegian
Finnish
Czech
Hungarian
Greek
Danish
Dutch
.
p.34
(factory
p.34