Toshiba TDP-SW20U Panduan Pemilik - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Toshiba TDP-SW20U. Toshiba TDP-SW20U 37 halaman. Toshiba tdp-s20u: specifications
Juga untuk Toshiba TDP-SW20U: Spesifikasi (1 halaman)

Halaman Cetak

Projecting images stored in a memory PC card

This projector can read JPEG files from a memory PC card to display them on the screen.

This allows you to give presentations without a computer, create an advertising screen

board using the slideshow function, and more. (The projector cannot reproduce animation

effects such as those produced by Microsoft

■ Memory PC cards

● PC card slot types

The PC card slot installed on this projector is TYPE II (PCMCIA Release 2.1)-compliant.

Please use memory PC cards and conversion adapters compliant with this type of PC

card slot.

Only a 3.3-V PC card can be used. (A 5-V only PC card cannot be used.)

● Supported storage media types

This projector supports the following types of ATA-compliant storage media. This

owner's manual refers to the combination of the ATA conversion adapter and media in

use as a "memory PC card.".

Storage media that can be used as-is

Flash ATA card, TOSHIBA Mobile Disk

Storage media that can be used in combination with each of the ATA conversion

adapter types

SmartMedia™, CompactFlash card, SD memory card, miniSD card, MMC, memory

stick, xD-Picture Card™

Note that inserting conversion adapters and memory cards with different functions than

above, and other memory cards (excluding the supplied wireless LAN PC card) into the

projector could damage the PC card or cause malfunctions.

● Memory PC Cards Whose Operation Have Been Confirmed

Please note that presence on this list is not a guarantee of operation.

• TOSHIBA Mobile Disk: PAMHD005(5GB), MEHDD20A(2GB)

• Flash ATA cards:

I-O DATA PCFCA-96M (96MB), PCFCA-128M (128MB)

• SmartMedia™:

TOSHIBA PDR-SM32 (32MB), PDR-SM64 (64MB)

• SD memory cards:

TOSHIBA SD-M512(512MB), SD-M256 (256MB),

SD-M128 (128MB)

• miniSD cards:

TOSHIBA SD-S64 (64MB), SD-S32 (32MB)

Adapters:

BUFFALO MCR-5A, RXD-A

The TOSHIBA IPC5019A SmartMedia™ PC card adapter is not ATA-compliant, and so

cannot be used by this projector.

● Backing up data

Toshiba recommend that you back up the data on the memory PC card before use.

(Toshiba assume no liability for losses incurred by data lost through the use of this

projector.)

PowerPoint

■ JPEG files

(1) Folder names may be up to 36 characters long, and file names up to 24 characters

including file extensions.

(2) Supported file extensions are jpg, JPG, jpeg, and JPEG.

(3) The maximum number including both folders and files is 512.

(4) Some JPEG files are not supported by this projector.

(5) Resolutions above 1,024 × 768 pixels will be displayed in compressed form.

The limitations in (4) above can be alleviated by converting the JPEG file with the

supplied JPEG Conversion Tool

p.55

■ Setting slideshow options

Slideshow is the function to display the JPEG image files stored in a memory PC card

one after another at fixed time intervals. When switching from one image to the next,

Slideshow can add various display effects (transitions) to them. If you select Slideshow

in step 2 in "Projector settings"

p.36

Item

PC card

Manual

Auto. (Select whether to automatically switch to

display

wireless/card input when a PC card in plugged.)

Auto. Demo

Off (Select whether to automatically start a slide show

when a PC card in plugged.)

Interval

Select the slide show display interval from among the following

options using

5 seconds/10 seconds/30 seconds/1 minute/3 minutes/

5 minutes/10 minutes

Transition

Select the type of transition for slide shows from among the following

options using

None / Wipe up / Wipe down

Dissolve / Slide up / Slide down / Slide left

Checker / Zoom / Spin zoom / Band wipe / Blind

Standard

Always

Play icon

● Details on individual items

• [PC card display] function

If you set PC card display to Auto., the projector switches to wireless/card input

•

mode automatically when a PC card is plugged into the PC card slot. Although this

item is provided as one of slideshow options, the setting works the same way even

when a wireless LAN PC card is plugged into the PC card slot.

If you set PC card display to Manual, the projector makes no response to the

•

plugging of a PC card into the PC card slot.

• [Auto. Demo] function

If you set Auto. Demo to On, the projector starts a slide show automatically when a

•

memory PC card is plugged into the PC card slot. The slide show displays the JPEG

files stored in the root directory of the memory PC card.

The projector starts the slide show automatically when the power is turned on with the

•

memory PC card plugged with Auto. Demo set to On.

software application.

, the following items can be set.

Description

/ Wipe left

/ Wipe right

/ Slide right